Influence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks

Document Type : Research Paper

Author

behbahan khatam alanbia university of technology

Abstract

Welding method and its parameters has an important effect on the formability and mechanical properties of tailor welded blanks(TWBs). In this study gas tungsten arc welding(GTAW) is used to joint aluminum TWBs. Aluminum TWBs consist of 6061 aluminum sheets with different thickness of 1mm and 2mm. Main parameters of GTAW consist of welding current, pressure of shielding gas, welding speed and diameter of filler material are investigated. Design of experiment based on the Tauguchi method is used to investigate the effect of each parameter and also parameters interaction. Erichsen formability test which is an out-of-plane forming test is used for formability investigation of aluminum TWBs. Forming height of Erichsen test is used as a criterion to study the effect of GTAW parameters on the quality of aluminum TWBs. Results of present study shows that shielding gas pressure and welding speed have the greatest impact on the formability of aluminum TWBs.

Keywords


[1] Z.Q. Sheng, Formability of tailor-welded strips and progressive forming test. Journal of Materials Processing Technology 205 (2008) 81-8.
[2] W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, Recent development in aluminium alloys for the automotive industry. Materials Science and Engineering: A. 280 (2000) 37-49.
[3] R. Safdarian Korouyeh, H. Moslemi Naeini, G. Liaghat, Forming Limit Diagram Prediction of Tailor-Welded Blank Using Experimental and Numerical Methods. J. of Materi Eng and Perform 21 (2012) 2053-61.
[4] R. Safdarian Korouyeh, H. Moslemi Naeini, M.J. Torkamany, G. Liaghat, Experimental and theoretical investigation of thickness ratio effect on the formability of tailor welded blank. Optics & Laser Technology 51 (2013) 24-31.
[5] M. Parente, R. Safdarian, A. Santos, A. Loureiro, P. Vilaca, R.M.N. Jorge, A study on the formability of aluminum tailor welded blanks produced by friction stir welding. Int J Adv Manuf Technol (2015) 1-13.
[6] S. Kou, Welding metallurgy. John Wiley and Sons, New York, 1987.
[7] M.A. Aesh, Optimization of weld bead dimensions in gtaw of aluminum–magnesium alloy. Materials and Manufacturing Processes. 16 (2001) 725-36.
[8] W. Chuaiphan, L. Srijaroenpramong, Effect of welding speed on microstructures, mechanical properties and corrosion behavior of GTA-welded AISI 201 stainless steel sheets. Journal of Materials Processing Technology. 214 (2014) 402-8.
[9] H.-g. Dong, C.-q. Liao, L.-q. Yang, Microstructure and mechanical properties of AZ31B magnesium alloy gas metal arc weld. Transactions of Nonferrous Metals Society of China. 22 (2012) 1336-41.
[10] S.G. Shiri, M. Nazarzadeh, M. Sharifitabar, M.S. Afarani, Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials. Transactions of Nonferrous Metals Society of China. 22 (2012) 2937-42.
[11] K. Devendranath Ramkumar, D. Mishra, B. Ganesh Raj, M.K. Vignesh, G. Thiruvengatam, S.P. Sudharshan, Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750. Materials & Design 66, Part A (2015) 356-65.
[12] N. Kiaee, M. Aghaie-Khafri, Optimization of gas tungsten arc welding process by response surface methodology. Materials & Design 54 (2014) 25-31.
[13] R. Sudhakaran, P.S. Sivasakthivel, S. Nagaraja, K.M. Eazhil, The Effect of Welding Process Parameters on Pitting Corrosion and Microstructure of Chromium-manganese Stainless Steel Gas Tungsten Arc Welded Plates. Procedia Engineering 97 (2014) 790-9.
[14] R. Safdarian Korouyeh, H.M. Naeini, M.J. Torkamany, J. Sabaghzadee, Effect of Laser Welding Parameters on Forming Behavior of Tailor Welded Blanks. Advanced Materials Research 445 (2012) 406-11.
[15] E. Gharibshahiyan, A.H. Raouf, N. Parvin, M. Rahimian, The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas welding. Materials & Design 32 (2011) 2042-8.
[16] A. Honarbakhsh-Raouf, H.R. Ghazvinloo, Influence of Wire Feeding Speed, Welding Speed and Preheating Temperature on Hardness and Microstructure of Weld in RQT 701-british Steel Produced by FCAW, 2010.
[17] E. Karadeniz, U. Ozsarac, C. Yildiz, The effect of process parameters on penetration in gas metal arc welding processes. Materials & Design 28 (2007) 649-56.
[18] B. Acherjee, D. Misra, D. Bose, K. Venkadeshwaran, Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology. Optics & Laser Technology 41 (2009) 956-67.
[19] M. Vasudevan, M.V. Kuppuswamy, A.K. Bhaduri, Optimising process parameters for gas tungsten arc welding of an austenitic stainless steel using genetic algorithm. Trans Indian Inst Met 63 (2010) 1-10.
[20] A.S.f.T.a.M. (ASTM), Metals Test Methods and Analytical Procedures, 1999 78–98, 501–8.
[21] D. Dietrich, D. Nickel, M. Krause, T. Lampke, M.P. Coleman, V. Randle, Formation of intermetallic phases in diffusion-welded joints of aluminium and magnesium alloys. Journal of Materials Science 46 (2011) 357-64.
[22] A.N. Ol'Shanskii, B.P. Morozov, Evaluation of the effect of increased pressure of shielding gas on the decrease in porosity of welded joints in aluminium alloys. Welding International 18 (2004) 304-6.
[23] P. Schempp, C.E. Cross, R. Häcker, A. Pittner, M. Rethmeier, Influence of grain size on mechanical properties of aluminium GTA weld metal. Welding in the World 57 (2013) 293-304.