A
-
Alimirzaloo, Vali
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Araghi, Mehran
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
-
Aref, Amirhossein
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
Ayaz, M.
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
Azadbeh, Maziyar
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
D
-
Dehghanian, Ch.
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Dehghanian, Changiz
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Doniavi, Ali
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
G
-
Ganji Arjenki, M.
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
H
-
Halvaee, A.
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Hoseinpour Gollo, M.
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
J
-
Joudaki, Jalal
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
K
-
Kadkhodayan, Mehran
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
-
Kamali, H.
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Kaplan, A.
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Kashani-Bozorg, S. F.
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Khandandel, S. E.
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
L
-
Lexian, H.
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
M
-
Mashhadi Keshtiban, Peyman
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Mazaheri, Y.
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel [Volume 7, Issue 1, 2020, Pages 84-91]
-
Meiabadi, M. Saleh
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Mirzadeh, H.
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Mirzadeh, Hamed
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Moradi, M.
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Moradi, M.
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Mostafapour, A.
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
N
-
Narooei, Keivan
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
-
Nayebi, Ali
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
P
-
Paidar, M
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Pakdaman, Sofia
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
R
-
Rabiezadeh, Amin
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Rakhshkhorshid, M.
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Ranjbaran, Sadra
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
-
Ranjbari, Gohar
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
-
Rashidi, Masoumeh
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
-
Rezaei Ashtiani, Hamidreza
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Rokhgireh, Hojatollah
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
-
Rouzegar, Rozita
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
S
-
Safari, M.
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Safari, Mehdi
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
-
Seyedkashi, S. M. H.
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
-
Seyyedhatami, S. M.
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
-
Shahbaz, Mehrdad
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
-
Sheikhi, M.
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel [Volume 7, Issue 1, 2020, Pages 84-91]
-
Sheydaei Govarchin Ghaleh, Saeed
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Sohrabi, M. J.
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Sohrabizadeh, M. A.
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel [Volume 7, Issue 1, 2020, Pages 84-91]
-
Soleimani, Maryam
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Solimanpur, Maghsud
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
T
-
Taghavi, Vahid
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Taheri, M.
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
V
-
Vahdati, M.
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Vahidshad, Y.
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
Your query does not match with any item