A
-
Aghaie-khafri, Mehrdad
Cold work simulation of hole expansion process and its effect on crack closure [Volume 1, Issue 1, 2014, Pages 11-23]
-
Aghaie-khafri, Mehrdad
A comparison between numerical and analytical modeling of ECAP [Volume 1, Issue 1, 2014, Pages 56-63]
B
-
Bakhshi-Jooybari, Mohammad
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
E
-
Ebrahimi, G.R.
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Ebrahimi, R.
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
G
-
Ghalandari, L.
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Ghalandari, L.
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Gozin, Mohamad-Hossen
Cold work simulation of hole expansion process and its effect on crack closure [Volume 1, Issue 1, 2014, Pages 11-23]
H
-
Hosseini, Mir Emad
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
-
Hosseinipour, Seyed Jamal
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
J
-
Janghorban, M.
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
K
-
Karimi Taheri, A.
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Kazeminezhad, M.
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Kevanlo, E.
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Khajehali, J.
The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response [Volume 1, Issue 2, 2014, Pages 23-31]
-
Khajehali, Mohammad javad
Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response [Volume 1, Issue 1, 2014, Pages 32-45]
-
Khaledzadeh, Y.
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Khosravifard, Ali
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels [Volume 1, Issue 1, 2014, Pages 1-10]
M
-
Mahdavian, M.M.
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Mahdavian, M.M.
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Mirbagheri, S.M.H.
The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response [Volume 1, Issue 2, 2014, Pages 23-31]
-
Molaei, Sh.
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
-
Momeni, A.
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
N
-
Nami, M.R.
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
O
-
Obeidavi, A.
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
R
-
Reihanian, M.
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Reihanian, M.
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Rejaeian, Morteza
A comparison between numerical and analytical modeling of ECAP [Volume 1, Issue 1, 2014, Pages 56-63]
S
-
Sani, S.A.A.
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Shahbaz, M.
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
Your query does not match with any item