A
-
AA 2024
Application of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets [Volume 6, Issue 2, 2019, Pages 20-29]
-
AA5052 aluminum alloy
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing [Volume 4, Issue 1, 2017, Pages 28-38]
-
AA5052 aluminum sheet
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Abaqus software
Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation [Volume 9, Issue 4, 2022, Pages 5-12]
-
Accumulative roll bonding
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Accumulative roll bonding
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Accumulative roll bonding
Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
-
Accumulative roll-bonding
Nanotwins Formation in Accumulative Roll-Bonded Brass [Volume 4, Issue 1, 2017, Pages 21-27]
-
AD730
Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
-
Adaptive neural-fuzzy inference system
Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
-
Additive manufacturing
Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel [Volume 9, Issue 3, 2022, Pages 62-73]
-
Adhesion strength
Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength [Volume 9, Issue 4, 2022, Pages 34-43]
-
Adiabatic temperature rise
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels [Volume 1, Issue 1, 2014, Pages 1-10]
-
Aifantis’s strain gradient elasticity theory
Wave Propagation in Rectangular Nanoplates Based on a New Strain Gradient Elasticity Theory with Considering in-Plane Magnetic Field [Volume 2, Issue 2, 2015, Pages 35-43]
-
AISI 1060 steel
Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
-
AISI 316L stainless steel machining
The Experimental and Numerical Study of Hexagonal Cutting Of AISI 316L Steel Round Bars [Volume 4, Issue 2, 2017, Pages 37-50]
-
AISI 422 steel
The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel [Volume 4, Issue 2, 2017, Pages 25-36]
-
Al6061
Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets [Volume 6, Issue 1, 2019, Pages 16-23]
-
Al (and alloys)
Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
-
Al foam
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Aluminum 1100
Comparison of Plastic Anisotropy and Crystallographic Texture Evolution of Aluminum 1100 Between 90° and 135° ECAE Processes [Volume 10, Issue 1, 2023, Pages 26-38]
-
Aluminum alloy 3105
Two point incremental forming of a complicated shape with negative and positive dies [Volume 4, Issue 2, 2017, Pages 51-61]
-
Aluminum/alumina composite
The Effect of Simple Shear Extrusion on the Texture and Porosity Content of Al/Al2O3 Composites [Volume 9, Issue 2, 2022, Pages 26-35]
-
Aluminum deposition
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
AM60 alloy
Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]
-
Amorphization
Plastic Deformation of Nano-Single Crystal Co-Cr-Ni- Fe-Mn High Entropy Alloy in Tension From 10 K to 1000 K by Atomistic Simulations [Volume 9, Issue 1, 2022, Pages 13-23]
-
Analysis of Variance
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Analytical analysis
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
-
ANFIS network
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
-
Anisotropy
Anisotropy in Elastic Properties of Porous 316L Stainless Steel Due to the Shape and Regular Cell Distribution [Volume 6, Issue 1, 2019, Pages 56-63]
-
Anisotropy
Study of Texture Weakening of Commercially Pure Copper Processed by Multiple Compressions in a Channel Die [Volume 8, Issue 4, 2021, Pages 15-25]
-
Anisotropy
Effect of Welding Processes on Texture and Anisotropy of HSLA Steel Sheet [Volume 9, Issue 4, 2022, Pages 44-55]
-
Anisotropy
Comparison of Plastic Anisotropy and Crystallographic Texture Evolution of Aluminum 1100 Between 90° and 135° ECAE Processes [Volume 10, Issue 1, 2023, Pages 26-38]
-
ANN
Flow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method [Volume 6, Issue 1, 2019, Pages 44-55]
-
Annealing
Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy [Volume 9, Issue 1, 2022, Pages 41-46]
-
Annealing
The Effects of the Thermo-Mechanical Process Variables on the Microstructure, Mechanical Properties, and Recrystallization Behavior of the Commercially Pure Titanium [Volume 9, Issue 3, 2022, Pages 4-17]
-
Annealing
Effect of Cold-Rolling and Annealing Treatments on the Microstructure and Mechanical Properties of AISI 309S Austenitic Stainless Steel [Volume 9, Issue 3, 2022, Pages 52-61]
-
ANOVA
Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process [Volume 6, Issue 1, 2019, Pages 2-15]
-
ANOVA
Investigation of Fracture Depth of Metal-Polymer Three‑Layer Sheet in Single-Point Incremental Forming Process [Volume 10, Issue 1, 2023, Pages 39-52]
-
API X65 pipeline steel
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
ARB
Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features [Volume 8, Issue 1, 2021, Pages 26-38]
-
Arrhenius equation
A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy [Volume 3, Issue 1, 2016, Pages 27-37]
-
Arrhenius model
Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition [Volume 8, Issue 2, 2021, Pages 54-63]
-
Arrhenius model
The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
-
Arrhenius-type model
Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel [Volume 9, Issue 3, 2022, Pages 62-73]
-
Artificial hip joint
Numerical Study and Optimization of the Thermomechanical Procedure in Forging of Two-Phase Ti-6Al-4V Alloy for Artificial Hip Joint Implant [Volume 9, Issue 3, 2022, Pages 31-43]
-
Artificial Neural Network
Prediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network [Volume 5, Issue 1, 2018, Pages 47-57]
-
Artificial Neural Network
Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel [Volume 9, Issue 3, 2022, Pages 62-73]
-
Austenitic stainless steel
Effect of Cold-Rolling and Annealing Treatments on the Microstructure and Mechanical Properties of AISI 309S Austenitic Stainless Steel [Volume 9, Issue 3, 2022, Pages 52-61]
-
Austenitizing temperature
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
AZ31 magnesium alloy
Constitutive Behavior of AZ31 Magnesium Tube Processed by Severe Plastic Deformation [Volume 9, Issue 3, 2022, Pages 44-51]
-
AZ91 magnesium alloy
A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy [Volume 3, Issue 1, 2016, Pages 27-37]
B
-
Bainite microstructure
Optimization of thermomechanical parameters to produce an ultra-high strength compressor disk [Volume 2, Issue 2, 2015, Pages 54-61]
-
Bead-on-Plate Welding
Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
-
Bending analysis
Bending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 1-13]
-
Bending angle
Prediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network [Volume 5, Issue 1, 2018, Pages 47-57]
-
Bezier formulation
Prediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach [Volume 4, Issue 1, 2017, Pages 52-62]
-
BHF
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
-
Bifurcation Theory
A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets [Volume 4, Issue 1, 2017, Pages 39-51]
-
Bimetals
Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process [Volume 5, Issue 1, 2018, Pages 1-18]
-
Bimetal sheet
Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process [Volume 6, Issue 1, 2019, Pages 2-15]
-
Bipolar plates
Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
-
Blast loading
Numerical Investigation of Circular Plates Deformation under Air Blast Wave [Volume 3, Issue 1, 2016, Pages 12-26]
-
Brenner potential
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
C
-
C2S2 process
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation [Volume 6, Issue 1, 2019, Pages 32-43]
-
Ca addition
Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions [Volume 6, Issue 1, 2019, Pages 24-31]
-
Camber
Pattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique [Volume 2, Issue 1, 2015, Pages 1-10]
-
Carbamide
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
CECAP process
Strain Distribution for CP-Ti in Cyclic Extrusion Compression Angular Pressing by RSM [Volume 10, Issue 3, 2023, Pages 25-35]
-
CEL
Coupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys [Volume 6, Issue 2, 2019, Pages 10-19]
-
Cell shape
Anisotropy in Elastic Properties of Porous 316L Stainless Steel Due to the Shape and Regular Cell Distribution [Volume 6, Issue 1, 2019, Pages 56-63]
-
Cellular structure
On the Substructure Development and Continuous Recrystallization in the Course of Selective Laser Melting of 316L Stainless Steel [Volume 10, Issue 1, 2023, Pages 61-69]
-
Channel depth
Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
-
Characterization
Exploring the Impact of Friction Stir Welding Parameters on Mechanical Performance and Microstructure of AZ91C Magnesium Alloy Joints Using Taguchi Method [Volume 10, Issue 3, 2023, Pages 4-14]
-
Chebyshev points
Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method [Volume 9, Issue 1, 2022, Pages 31-40]
-
Circular plate
Numerical Investigation of Circular Plates Deformation under Air Blast Wave [Volume 3, Issue 1, 2016, Pages 12-26]
-
Circumferential scanning
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
-
Cladding
Application of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets [Volume 6, Issue 2, 2019, Pages 20-29]
-
Cold roll bonding
An investigation on the bond strength of aluminum strips in presence of brass mesh after cold roll bonding [Volume 3, Issue 2, 2016, Pages 52-63]
-
Cold rolling
Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy [Volume 9, Issue 1, 2022, Pages 41-46]
-
Cold rolling
The Simulation of Texture of Al0.3CoCrFeNi High Entropy Alloy after Cold Deformation using Visco-Plastic Self-Consistent Model [Volume 10, Issue 1, 2023, Pages 53-60]
-
Cold-rolling
The Effects of the Thermo-Mechanical Process Variables on the Microstructure, Mechanical Properties, and Recrystallization Behavior of the Commercially Pure Titanium [Volume 9, Issue 3, 2022, Pages 4-17]
-
Cold working
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing [Volume 4, Issue 1, 2017, Pages 28-38]
-
Cold working
Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
-
Commercially pure titanium
The Effects of the Thermo-Mechanical Process Variables on the Microstructure, Mechanical Properties, and Recrystallization Behavior of the Commercially Pure Titanium [Volume 9, Issue 3, 2022, Pages 4-17]
-
Compaction
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function [Volume 3, Issue 2, 2016, Pages 26-38]
-
Compaction equations
Effect of Particle Size on the Compressibility and Sintering of Titanium Powders [Volume 6, Issue 2, 2019, Pages 42-51]
-
Composite
An investigation on the bond strength of aluminum strips in presence of brass mesh after cold roll bonding [Volume 3, Issue 2, 2016, Pages 52-63]
-
Composite
Synthesis and Consolidation of Ag/ZnO Composite Powders via SPS Method [Volume 8, Issue 3, 2021, Pages 26-33]
-
Composite
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) [Volume 9, Issue 2, 2022, Pages 58-69]
-
Composite patch
A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
-
Compressibility
Effect of Particle Size on the Compressibility and Sintering of Titanium Powders [Volume 6, Issue 2, 2019, Pages 42-51]
-
Compressor Blade
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Consolidation
Synthesis and Consolidation of Ag/ZnO Composite Powders via SPS Method [Volume 8, Issue 3, 2021, Pages 26-33]
-
Constant Friction Factor
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
-
Constitutive analysis
Hot Deformation Behavior of 17-7 PH Stainless Steel [Volume 4, Issue 1, 2017, Pages 1-11]
-
Constitutive equations
A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy [Volume 3, Issue 1, 2016, Pages 27-37]
-
Constitutive equations
A Robust RBF-ANN Model to Predict the Hot Deformation Flow Curves of API X65 Pipeline Steel [Volume 4, Issue 1, 2017, Pages 12-20]
-
Constitutive equations
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Contour method
Investigation of Laser, Wire-cut and Plasma Cutting Methods on the Residual Stress Distribution of St37 Sheet Using the Contour Method [Volume 10, Issue 3, 2023, Pages 43-53]
-
Cooling rate
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Copper
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Copper open cell foam
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure [Volume 10, Issue 1, 2023, Pages 4-12]
-
Corrosion-fatigue crack growth
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique [Volume 6, Issue 1, 2019, Pages 64-73]
-
Co superalloy
Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
-
Coupled Eulerian-Lagrangian analysis
Coupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys [Volume 6, Issue 2, 2019, Pages 10-19]
-
CP-Ti
Strain Distribution for CP-Ti in Cyclic Extrusion Compression Angular Pressing by RSM [Volume 10, Issue 3, 2023, Pages 25-35]
-
CP titanium
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
CRITIC
Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques [Volume 10, Issue 1, 2023, Pages 13-25]
-
Critical fluid pressure
Integral Hydro-Bulge Forming of Spherical Vessels: A Numerical and Experimental Study [Volume 10, Issue 2, 2023, Pages 4-11]
-
Crystallographic texture
The Effect of Simple Shear Extrusion on the Texture and Porosity Content of Al/Al2O3 Composites [Volume 9, Issue 2, 2022, Pages 26-35]
-
Cu-bearing HSLA steel
Interaction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel [Volume 2, Issue 1, 2015, Pages 43-50]
-
Cu/Sn multilayer
Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features [Volume 8, Issue 1, 2021, Pages 26-38]
-
CuZn alloy
Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]
-
Cylindrical cups
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
D
-
Damage accumulation
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation [Volume 6, Issue 1, 2019, Pages 32-43]
-
Damaged pipes
A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
-
Deep drawing
Numerical and Experimental Investigation of Deep Drawing Process in Square Section of Single-Layer and Two-Layer Sheet [Volume 5, Issue 1, 2018, Pages 58-70]
-
Deep-drawing
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
-
Deformation mechanism
The Effect of Strain Rate on the Tensile Properties of PMMA/Hydroxyapatite Composite [Volume 10, Issue 2, 2023, Pages 35-43]
-
Deformation zone
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation [Volume 5, Issue 2, 2018, Pages 36-53]
-
Dental implant
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants [(Articles in Press)]
-
Design of Experiment
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Design of experiments
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Design of experiments
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
-
Design of experiments (DOE)
Two point incremental forming of a complicated shape with negative and positive dies [Volume 4, Issue 2, 2017, Pages 51-61]
-
Die pressing
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Die radius
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
-
Dislocation density
Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets [Volume 6, Issue 1, 2019, Pages 16-23]
-
Dislocation density
Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
-
Dissimilar friction stir welding
Coupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys [Volume 6, Issue 2, 2019, Pages 10-19]
-
DOE
Optimization and Investigation of the Initial Parameters Effects on Machining Forces in Aerial Graphite Part [Volume 9, Issue 4, 2022, Pages 56-68]
-
Dome shaped part
A novel method for laser forming of two-step bending of a dome shaped part [Volume 4, Issue 2, 2017, Pages 1-14]
-
Double action die pressing
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Double Autofrettage
Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading [Volume 5, Issue 2, 2018, Pages 54-71]
-
DP steels
Grain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite [Volume 5, Issue 1, 2018, Pages 19-25]
-
Drinking water pipelines
A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
-
DRX
Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
-
Dual Phase Steel
Constitutive Modeling of a Nb-Contained Advanced High-Strength Steel (AHSS) under Hot Compression Experiments [Volume 9, Issue 1, 2022, Pages 24-30]
-
Ductile Fracture
A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets [Volume 4, Issue 1, 2017, Pages 39-51]
-
Ductility trough
Hot Ductility Behavior of the Electrolytic Tough Pitch Copper Having Different Initial Oxygen Content [Volume 9, Issue 4, 2022, Pages 13-25]
-
Dynamic recovery
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Dynamic recrystallization
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Dynamic recrystallization
Interaction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel [Volume 2, Issue 1, 2015, Pages 43-50]
-
Dynamic recrystallization
Hot Deformation Behavior of 17-7 PH Stainless Steel [Volume 4, Issue 1, 2017, Pages 1-11]
-
Dynamic recrystallization
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
Dynamic Simulation
Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading [Volume 5, Issue 2, 2018, Pages 54-71]
E
-
EBSD
Evaluation of TiAl3 Intermetallic Formation Mechanism and Revolution of Annealing Texture in Al/Ti Powder/Al Laminate Composite Fabricated by Cold Roll Bonding and Post-Annealing Treatment [Volume 9, Issue 2, 2022, Pages 14-25]
-
ECAE
Comparison of Plastic Anisotropy and Crystallographic Texture Evolution of Aluminum 1100 Between 90° and 135° ECAE Processes [Volume 10, Issue 1, 2023, Pages 26-38]
-
ECAP
A comparison between numerical and analytical modeling of ECAP [Volume 1, Issue 1, 2014, Pages 56-63]
-
ECAP
Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
-
ECAP process
Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]
-
ECAR
Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets [Volume 6, Issue 1, 2019, Pages 16-23]
-
Elastic deformation
Iranian Journal of Materials Forming, Issue 2, April 2023 [Volume 10, Issue 2, 2023, Pages 2-3]
-
Elastic Modulus
Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
-
Electrochemical deposition
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure [Volume 10, Issue 1, 2023, Pages 4-12]
-
Electrographite
A Study on the Effect of Coke Particle Size and Applied Compacting Pressure on the Physical Properties of Electrographite Brushes [Volume 10, Issue 2, 2023, Pages 12-21]
-
Electroless deposition
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure [Volume 10, Issue 1, 2023, Pages 4-12]
-
Electron microscopy
Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process [Volume 2, Issue 2, 2015, Pages 44-53]
-
Energy absorption
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading [Volume 6, Issue 2, 2019, Pages 62-81]
-
Energy absorption
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Engine
Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads [Volume 9, Issue 1, 2022, Pages 47-54]
-
Epoxy
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) [Volume 9, Issue 2, 2022, Pages 58-69]
-
Epoxy
Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength [Volume 9, Issue 4, 2022, Pages 34-43]
-
Equal-channel angular pressing
Ten years of severe plastic deformation (SPD) in Iran, part I: equal channel angular pressing (ECAP) [Volume 5, Issue 1, 2018, Pages 71-113]
-
Equivalent plastic strain
Numerical and Experimental Investigation of Deep Drawing Process in Square Section of Single-Layer and Two-Layer Sheet [Volume 5, Issue 1, 2018, Pages 58-70]
-
Eutectic high-entropy alloy (EHEA)
Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy [Volume 9, Issue 1, 2022, Pages 41-46]
-
Explosive forming
Numerical Investigation of Circular Plates Deformation under Air Blast Wave [Volume 3, Issue 1, 2016, Pages 12-26]
-
Explosive-welded
Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process [Volume 5, Issue 1, 2018, Pages 1-18]
-
Exponential equation
A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy [Volume 3, Issue 1, 2016, Pages 27-37]
-
Exponential shear deformation theory
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
-
Extrusion
Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions [Volume 6, Issue 1, 2019, Pages 24-31]
-
Extrusion
Simulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die [Volume 6, Issue 2, 2019, Pages 52-61]
-
Extrusion
Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
F
-
Failure
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
-
Failure
Numerical Investigation of Circular Plates Deformation under Air Blast Wave [Volume 3, Issue 1, 2016, Pages 12-26]
-
Failure
Iranian Journal of Materials Forming, Issue 1, January 2023 [Volume 10, Issue 1, 2023, Pages 2-3]
-
Failure
Iranian Journal of Materials Forming, Issue 2, April 2023 [Volume 10, Issue 2, 2023, Pages 2-3]
-
Fe-Al-Si-intermetallic compound
Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response [Volume 1, Issue 1, 2014, Pages 32-45]
-
FEM
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Fe-Mn-Al-C steel
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel [Volume 7, Issue 1, 2020, Pages 84-91]
-
FEM simulation
New geometry for TCP: severe plastic deformation of tubes [Volume 3, Issue 2, 2016, Pages 64-78]
-
FESEM
Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features [Volume 8, Issue 1, 2021, Pages 26-38]
-
FG Cylinder
Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading [Volume 5, Issue 2, 2018, Pages 54-71]
-
FGMs
Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
-
Finite Element Analysis
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
-
Finite Element Analysis
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing [Volume 2, Issue 1, 2015, Pages 18-29]
-
Finite Element Analysis
Investigation of Effective Parameters of the Two-Layer Sheet Hydroforming Process for Hollow Parts with Complex Geometry [Volume 2, Issue 2, 2015, Pages 27-34]
-
Finite Element Analysis
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation [Volume 6, Issue 1, 2019, Pages 32-43]
-
Finite Element Analysis
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process [Volume 6, Issue 2, 2019, Pages 30-41]
-
Finite Element Analysis
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
Finite Element Analysis
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
-
Finite Element Analysis
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
-
Finite Element Analysis
Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
-
Finite Element Analysis
Numerical Study and Optimization of the Thermomechanical Procedure in Forging of Two-Phase Ti-6Al-4V Alloy for Artificial Hip Joint Implant [Volume 9, Issue 3, 2022, Pages 31-43]
-
Finite Element Analysis
Finite Element Analysis of Phase Distribution in Forging of the Two-Phase Ti-6Al-4V Alloy to have a Hip Joint Implant [Volume 9, Issue 4, 2022, Pages 26-33]
-
Finite Element Analysis
Strain Distribution for CP-Ti in Cyclic Extrusion Compression Angular Pressing by RSM [Volume 10, Issue 3, 2023, Pages 25-35]
-
Finite element method
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
-
Finite element method
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function [Volume 3, Issue 2, 2016, Pages 26-38]
-
Finite element method
Workability study in near-pritectic Sn-5%Sb lead-free solder alloy processed by severe plastic deformation [Volume 3, Issue 2, 2016, Pages 39-51]
-
Finite element method
Numerical and Experimental Investigation of Deep Drawing Process in Square Section of Single-Layer and Two-Layer Sheet [Volume 5, Issue 1, 2018, Pages 58-70]
-
Finite element method
Finite element simulation of two-point incremental forming of free-form parts [Volume 5, Issue 2, 2018, Pages 26-35]
-
Finite element method
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) [Volume 9, Issue 2, 2022, Pages 58-69]
-
Finite element method
Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation [Volume 9, Issue 4, 2022, Pages 5-12]
-
Finite element simulation
Optimization of die geometry for tube channel pressing [Volume 5, Issue 1, 2018, Pages 26-35]
-
Flame forming process
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
-
Floating bobbin tool
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Flow curves
Quantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps [Volume 5, Issue 1, 2018, Pages 36-46]
-
Flowforming
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
-
Flow stress
A Robust RBF-ANN Model to Predict the Hot Deformation Flow Curves of API X65 Pipeline Steel [Volume 4, Issue 1, 2017, Pages 12-20]
-
Flow stress
A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy [Volume 4, Issue 2, 2017, Pages 15-24]
-
Flow stress
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Flow stress prediction
Flow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method [Volume 6, Issue 1, 2019, Pages 44-55]
-
Forced cooling
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
-
Force–displacement diagram
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Forging
Numerical Study and Optimization of the Thermomechanical Procedure in Forging of Two-Phase Ti-6Al-4V Alloy for Artificial Hip Joint Implant [Volume 9, Issue 3, 2022, Pages 31-43]
-
Formability
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
Formability, Erichsen, Design of experiment
Influence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks [Volume 4, Issue 2, 2017, Pages 62-75]
-
Forming Force
Numerical and Experimental Investigation of Deep Drawing Process in Square Section of Single-Layer and Two-Layer Sheet [Volume 5, Issue 1, 2018, Pages 58-70]
-
Forming Force
Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process [Volume 6, Issue 1, 2019, Pages 2-15]
-
Forming Force
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process [Volume 6, Issue 2, 2019, Pages 30-41]
-
Forming Force
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
-
Forming Force
Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet [Volume 9, Issue 2, 2022, Pages 46-57]
-
Forming Force
Investigation of Fracture Depth of Metal-Polymer Three‑Layer Sheet in Single-Point Incremental Forming Process [Volume 10, Issue 1, 2023, Pages 39-52]
-
Forming Limit Diagram
A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets [Volume 4, Issue 1, 2017, Pages 39-51]
-
Forming Limit Diagram (FLD)
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L [Volume 3, Issue 1, 2016, Pages 55-64]
-
Forming temperature
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Fracture depth
Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process [Volume 6, Issue 1, 2019, Pages 2-15]
-
Fracture depth
Investigation of Fracture Depth of Metal-Polymer Three‑Layer Sheet in Single-Point Incremental Forming Process [Volume 10, Issue 1, 2023, Pages 39-52]
-
Free-form
Finite element simulation of two-point incremental forming of free-form parts [Volume 5, Issue 2, 2018, Pages 26-35]
-
Friction Coefficient
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
-
Friction Force
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process [Volume 6, Issue 2, 2019, Pages 30-41]
-
Friction stir processing
Application of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets [Volume 6, Issue 2, 2019, Pages 20-29]
-
Friction stir processing
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Friction stir processing
Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]
-
Friction Stir Welding
Exploring the Impact of Friction Stir Welding Parameters on Mechanical Performance and Microstructure of AZ91C Magnesium Alloy Joints Using Taguchi Method [Volume 10, Issue 3, 2023, Pages 4-14]
-
Friction surfacing
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Friedlander equation
Numerical Investigation of Circular Plates Deformation under Air Blast Wave [Volume 3, Issue 1, 2016, Pages 12-26]
-
FSBE
A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
-
FSW
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks [Volume 5, Issue 2, 2018, Pages 85-95]
G
-
Gamma-prime
Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy [Volume 10, Issue 2, 2023, Pages 44-54]
-
Genetic Algorithm
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Gleeble simulation
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Grain boundary melting
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Grain refinement
The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel [Volume 4, Issue 2, 2017, Pages 25-36]
-
Grain size
Grain Refinement and Hall-Petch Strengthening of Magnesium Alloy Via Alloying and Hot Extrusion [Volume 6, Issue 2, 2019, Pages 2-9]
-
Grain size
A Study of the Effects of Grain Size, Sheet Thickness and Punch Radii on Springback in Copper Sheets [Volume 9, Issue 2, 2022, Pages 4-13]
-
Graphite
Optimization and Investigation of the Initial Parameters Effects on Machining Forces in Aerial Graphite Part [Volume 9, Issue 4, 2022, Pages 56-68]
-
Graphitization
A Study on the Effect of Coke Particle Size and Applied Compacting Pressure on the Physical Properties of Electrographite Brushes [Volume 10, Issue 2, 2023, Pages 12-21]
-
Gray wolf optimization algorithm
Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
-
GTD-111 superalloy
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
GTN model
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
H
-
Hall-Petch strengthening
Grain Refinement and Hall-Petch Strengthening of Magnesium Alloy Via Alloying and Hot Extrusion [Volume 6, Issue 2, 2019, Pages 2-9]
-
HDS, Anisotropic, Forming, FSW
Evaluation of Effective Paramters on Formability of TWB [Volume 2, Issue 1, 2015, Pages 11-17]
-
Heat treatment
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Heat treatment
Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]
-
Heat treatment
Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads [Volume 9, Issue 1, 2022, Pages 47-54]
-
Heat treatment
Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy [Volume 10, Issue 2, 2023, Pages 44-54]
-
High entropy alloy
Plastic Deformation of Nano-Single Crystal Co-Cr-Ni- Fe-Mn High Entropy Alloy in Tension From 10 K to 1000 K by Atomistic Simulations [Volume 9, Issue 1, 2022, Pages 13-23]
-
High entropy alloys
The Simulation of Texture of Al0.3CoCrFeNi High Entropy Alloy after Cold Deformation using Visco-Plastic Self-Consistent Model [Volume 10, Issue 1, 2023, Pages 53-60]
-
High Manganese
Stacking Fault Energy and Microstructural Insight into the Dynamic Deformation of High-Manganese TRIP and TWIP Steels [Volume 2, Issue 1, 2015, Pages 51-61]
-
High strain rate
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels [Volume 1, Issue 1, 2014, Pages 1-10]
-
High strain rate
Stacking Fault Energy and Microstructural Insight into the Dynamic Deformation of High-Manganese TRIP and TWIP Steels [Volume 2, Issue 1, 2015, Pages 51-61]
-
High-strength steel
Constitutive Modeling of a Nb-Contained Advanced High-Strength Steel (AHSS) under Hot Compression Experiments [Volume 9, Issue 1, 2022, Pages 24-30]
-
Hill’s Theory of localized necking
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L [Volume 3, Issue 1, 2016, Pages 55-64]
-
Hip joint implant
Finite Element Analysis of Phase Distribution in Forging of the Two-Phase Ti-6Al-4V Alloy to have a Hip Joint Implant [Volume 9, Issue 4, 2022, Pages 26-33]
-
Hole-drilling
Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method [Volume 9, Issue 1, 2022, Pages 31-40]
-
Hollow tube
Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
-
Hot compression
Interaction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel [Volume 2, Issue 1, 2015, Pages 43-50]
-
Hot compression
A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy [Volume 4, Issue 2, 2017, Pages 15-24]
-
Hot compression
Constitutive Modeling of a Nb-Contained Advanced High-Strength Steel (AHSS) under Hot Compression Experiments [Volume 9, Issue 1, 2022, Pages 24-30]
-
Hot compression test
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
Hot deep drawing
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
Hot deformation
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Hot deformation
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing [Volume 2, Issue 1, 2015, Pages 18-29]
-
Hot deformation
Interaction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel [Volume 2, Issue 1, 2015, Pages 43-50]
-
Hot deformation
A Robust RBF-ANN Model to Predict the Hot Deformation Flow Curves of API X65 Pipeline Steel [Volume 4, Issue 1, 2017, Pages 12-20]
-
Hot deformation
The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel [Volume 4, Issue 2, 2017, Pages 25-36]
-
Hot deformation
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Hot deformation
Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition [Volume 8, Issue 2, 2021, Pages 54-63]
-
Hot deformation
Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
-
Hot deformation
The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
-
Hot deformation behavior
Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel [Volume 9, Issue 3, 2022, Pages 62-73]
-
Hot deformation modeling
Flow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method [Volume 6, Issue 1, 2019, Pages 44-55]
-
Hot deformation processes
A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy [Volume 3, Issue 1, 2016, Pages 27-37]
-
Hot ductility
Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling [Volume 2, Issue 1, 2015, Pages 30-42]
-
Hot Extrusion
Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
-
Hot gas forming process
Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
-
Hot press
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
-
Hot workability
Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
-
HSLA steel
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique [Volume 6, Issue 1, 2019, Pages 64-73]
-
HSLA steel
Effect of Welding Processes on Texture and Anisotropy of HSLA Steel Sheet [Volume 9, Issue 4, 2022, Pages 44-55]
-
Hydroxyapatite
The Effect of Strain Rate on the Tensile Properties of PMMA/Hydroxyapatite Composite [Volume 10, Issue 2, 2023, Pages 35-43]
-
Hyperbolic sine equation
Flow Stress Modeling in a γ-γ/ Cobalt Base Superalloy by Using the Hyperbolic Sine Equation and ANN Method [Volume 6, Issue 1, 2019, Pages 44-55]
-
Hyperbolic sine modeling
Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
-
Hyperelastic
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
I
-
ICHD Measurement
Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
-
Inconel 617
Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy [Volume 10, Issue 2, 2023, Pages 44-54]
-
Incremental Forming
Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process [Volume 5, Issue 1, 2018, Pages 1-18]
-
Incremental Forming
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process [Volume 6, Issue 2, 2019, Pages 30-41]
-
Incremental sheet forming
Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process [Volume 6, Issue 1, 2019, Pages 2-15]
-
Incremental sheet forming
Investigation of Fracture Depth of Metal-Polymer Three‑Layer Sheet in Single-Point Incremental Forming Process [Volume 10, Issue 1, 2023, Pages 39-52]
-
Indentation
Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation [Volume 3, Issue 1, 2016, Pages 1-11]
-
Integral hydro-bulge forming
Integral Hydro-Bulge Forming of Spherical Vessels: A Numerical and Experimental Study [Volume 10, Issue 2, 2023, Pages 4-11]
-
Intercritical annealing
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Internal gear
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
-
Isothermal annealing
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing [Volume 4, Issue 1, 2017, Pages 28-38]
-
Isotropic hardening
Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation [Volume 3, Issue 1, 2016, Pages 1-11]
-
Isotropic hardening
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
J
-
JMAK model
Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel [Volume 7, Issue 1, 2020, Pages 84-91]
-
JmatPro
Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy [Volume 10, Issue 2, 2023, Pages 44-54]
-
Johnson-Cook equation
Genetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation [Volume 7, Issue 1, 2020, Pages 2-13]
-
Johnson-Cook model
The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
-
Joint efficiency
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Joint Strength
Parametric Study of Reinforcement of Keyhole-less Friction Stir Spot Welding using Al2O3 and TiO2 Nanopowders [Volume 10, Issue 2, 2023, Pages 55-67]
K
-
Kinetics of static recovery
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing [Volume 4, Issue 1, 2017, Pages 28-38]
L
-
L605
Effect of Severe Surface Plastic Deformation on Tribological Properties of CoCrWNi Super Alloys [Volume 10, Issue 2, 2023, Pages 22-34]
-
L9 Orthogonal Array
Exploring the Impact of Friction Stir Welding Parameters on Mechanical Performance and Microstructure of AZ91C Magnesium Alloy Joints Using Taguchi Method [Volume 10, Issue 3, 2023, Pages 4-14]
-
Laminar composite
Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]
-
Laser
Investigation of Laser, Wire-cut and Plasma Cutting Methods on the Residual Stress Distribution of St37 Sheet Using the Contour Method [Volume 10, Issue 3, 2023, Pages 43-53]
-
Laser forming
A novel method for laser forming of two-step bending of a dome shaped part [Volume 4, Issue 2, 2017, Pages 1-14]
-
Laser forming
Prediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network [Volume 5, Issue 1, 2018, Pages 47-57]
-
Laser tube bending
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
-
Laser tube bending
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Lateral bending angle
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Lateral petals
Integral Hydro-Bulge Forming of Spherical Vessels: A Numerical and Experimental Study [Volume 10, Issue 2, 2023, Pages 4-11]
-
Lattice Boltzmann Method
Simulation of Foaming and Deformation for Composite Aluminum Foams [Volume 3, Issue 1, 2016, Pages 38-54]
-
Lennard Jones potential
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
-
Limiting Strength Ratio (LSR)
A Novel Approach for Formability Prediction of Tailor Welded Blank [Volume 3, Issue 2, 2016, Pages 1-12]
-
Limiting Thickness ratio (LTR)
A Novel Approach for Formability Prediction of Tailor Welded Blank [Volume 3, Issue 2, 2016, Pages 1-12]
-
Liquation cracking
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
LSSVM
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique [Volume 6, Issue 1, 2019, Pages 64-73]
M
-
Machining
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants [(Articles in Press)]
-
MADM
Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques [Volume 10, Issue 1, 2023, Pages 13-25]
-
Magnesium alloy
Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
-
Magnesium Alloy Joints
Exploring the Impact of Friction Stir Welding Parameters on Mechanical Performance and Microstructure of AZ91C Magnesium Alloy Joints Using Taguchi Method [Volume 10, Issue 3, 2023, Pages 4-14]
-
Magnesium alloys
Grain Refinement and Hall-Petch Strengthening of Magnesium Alloy Via Alloying and Hot Extrusion [Volume 6, Issue 2, 2019, Pages 2-9]
-
Magnesium alloys
Improving the Semisolid Deformation Behavior and Thixoformability of AZ61 Magnesium Alloy Through Controlling the Strain Induced Melt Activation Process [Volume 9, Issue 3, 2022, Pages 18-30]
-
Magnetic field
Wave Propagation in Rectangular Nanoplates Based on a New Strain Gradient Elasticity Theory with Considering in-Plane Magnetic Field [Volume 2, Issue 2, 2015, Pages 35-43]
-
Main bending angle
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Marcinaik-Kuczynski analysis
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L [Volume 3, Issue 1, 2016, Pages 55-64]
-
Marciniak-Kuczynski (M-K) Method
A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets [Volume 4, Issue 1, 2017, Pages 39-51]
-
Martensite reversion
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Martensitic stainless steel
Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test [Volume 1, Issue 2, 2014, Pages 32-43]
-
Martensitic stainless steel
Quantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps [Volume 5, Issue 1, 2018, Pages 36-46]
-
Mechanical Alloying
Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
-
Mechanical Behavior
Iranian Journal of Materials Forming, Issue 3, July 2021 [Volume 8, Issue 3, 2021, Pages 2-3]
-
Mechanical Behavior
Iranian Journal of Materials Forming, Issue 4, October 2021 [Volume 8, Issue 4, 2021, Pages 2-3]
-
Mechanical Behaviour
Iranian Journal of Materials Forming, Issue 1, January 2022 [Volume 9, Issue 1, 2022, Pages 2-4]
-
Mechanical properties
Effect of the Particle Size on the Deformation and Fracture Behavior of Al/4vol.%Al2O3 Composite Produced by Accumulative Roll Bonding (ARB) [Volume 2, Issue 2, 2015, Pages 14-26]
-
Mechanical properties
Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process [Volume 2, Issue 2, 2015, Pages 44-53]
-
Mechanical properties
Optimization of thermomechanical parameters to produce an ultra-high strength compressor disk [Volume 2, Issue 2, 2015, Pages 54-61]
-
Mechanical properties
Grain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite [Volume 5, Issue 1, 2018, Pages 19-25]
-
Mechanical properties
Ten years of severe plastic deformation (SPD) in Iran, part I: equal channel angular pressing (ECAP) [Volume 5, Issue 1, 2018, Pages 71-113]
-
Mechanical properties
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks [Volume 5, Issue 2, 2018, Pages 85-95]
-
Mechanical properties
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Mechanical properties
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Mechanical properties
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Mechanical properties
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Mechanical properties
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Mechanical properties
Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry [Volume 9, Issue 2, 2022, Pages 36-45]
-
Mechanical properties
The Effects of the Thermo-Mechanical Process Variables on the Microstructure, Mechanical Properties, and Recrystallization Behavior of the Commercially Pure Titanium [Volume 9, Issue 3, 2022, Pages 4-17]
-
Mechanical properties
Effect of Welding Processes on Texture and Anisotropy of HSLA Steel Sheet [Volume 9, Issue 4, 2022, Pages 44-55]
-
Mechanical properties
Iranian Journal of Materials Forming, Issue 4, October 2022 [Volume 9, Issue 4, 2022, Pages 2-4]
-
Mechanical properties
Iranian Journal of Materials Forming, Issue 1, January 2023 [Volume 10, Issue 1, 2023, Pages 2-3]
-
Mechanical properties
A Model to Estimate the Stress-Strain Behavior of Polyimide Electrospun Fabric [Volume 10, Issue 3, 2023, Pages 36-42]
-
Mechanical property
Effect of Cold-Rolling and Annealing Treatments on the Microstructure and Mechanical Properties of AISI 309S Austenitic Stainless Steel [Volume 9, Issue 3, 2022, Pages 52-61]
-
Mechanical strength
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure [Volume 10, Issue 1, 2023, Pages 4-12]
-
Mechanics
Iranian Journal of Materials Forming, Issue 1, January 2022 [Volume 9, Issue 1, 2022, Pages 2-4]
-
MEREC
Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques [Volume 10, Issue 1, 2023, Pages 13-25]
-
Metal foam
Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response [Volume 1, Issue 1, 2014, Pages 32-45]
-
Metal foam
The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response [Volume 1, Issue 2, 2014, Pages 23-31]
-
Metal Foam Aluminum A356
Simulation of Foaming and Deformation for Composite Aluminum Foams [Volume 3, Issue 1, 2016, Pages 38-54]
-
Metal Forming
The Relationship between Constant Friction Factor and Coefficient of Friction in Metal Forming using Finite Element Analysis [Volume 1, Issue 2, 2014, Pages 14-22]
-
Metallic foam
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading [Volume 6, Issue 2, 2019, Pages 62-81]
-
Metallurgy
Iranian Journal of Materials Forming, Issue 1, January 2022 [Volume 9, Issue 1, 2022, Pages 2-4]
-
Metal matrix composite
The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
-
Metal matrix composites (MMCs)
Effect of the Particle Size on the Deformation and Fracture Behavior of Al/4vol.%Al2O3 Composite Produced by Accumulative Roll Bonding (ARB) [Volume 2, Issue 2, 2015, Pages 14-26]
-
Metal-matrix composites (MMCs)
Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process [Volume 2, Issue 2, 2015, Pages 44-53]
-
Metal–polymer three‑layer sheet fracture depth
Investigation of Fracture Depth of Metal-Polymer Three‑Layer Sheet in Single-Point Incremental Forming Process [Volume 10, Issue 1, 2023, Pages 39-52]
-
Metastable austenitic steels
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Microcapsule
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) [Volume 9, Issue 2, 2022, Pages 58-69]
-
Microhardness
Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
-
Micromechanisms
Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength [Volume 9, Issue 4, 2022, Pages 34-43]
-
Microstructural evolution
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
Microstructure
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing [Volume 2, Issue 1, 2015, Pages 18-29]
-
Microstructure
Effect of the Particle Size on the Deformation and Fracture Behavior of Al/4vol.%Al2O3 Composite Produced by Accumulative Roll Bonding (ARB) [Volume 2, Issue 2, 2015, Pages 14-26]
-
Microstructure
Grain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite [Volume 5, Issue 1, 2018, Pages 19-25]
-
Microstructure
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks [Volume 5, Issue 2, 2018, Pages 85-95]
-
Microstructure
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
Microstructure
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Microstructure
Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
-
Microstructure
Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry [Volume 9, Issue 2, 2022, Pages 36-45]
-
Microstructure
Improving the Semisolid Deformation Behavior and Thixoformability of AZ61 Magnesium Alloy Through Controlling the Strain Induced Melt Activation Process [Volume 9, Issue 3, 2022, Pages 18-30]
-
Microstructure
Fabrication of Copper Open Cell Foam by Electrochemical Deposition Method and Investigation on the Effect of Current Intensity and Plating Solution on the Created Microstructure [Volume 10, Issue 1, 2023, Pages 4-12]
-
Microstructure
Using JMatPro Simulation to Study the Effect of Heat Treatment Temperature on the Dissolution of Gamma-Prime Phase in Inconel 617 Nickel-Based Superalloy [Volume 10, Issue 2, 2023, Pages 44-54]
-
Microstructure
Effect of Processing Parameters on the Morphology of α-phase in Ti-6Al-4V Alloy During the Two-step Hot Deformation [Volume 10, Issue 3, 2023, Pages 54-62]
-
Microstructures
Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions [Volume 6, Issue 1, 2019, Pages 24-31]
-
Mild steel
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Mild steel
Parametric Study of Reinforcement of Keyhole-less Friction Stir Spot Welding using Al2O3 and TiO2 Nanopowders [Volume 10, Issue 2, 2023, Pages 55-67]
-
Modeling
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique [Volume 6, Issue 1, 2019, Pages 64-73]
-
Modeling
A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
-
Modeling
A Model to Estimate the Stress-Strain Behavior of Polyimide Electrospun Fabric [Volume 10, Issue 3, 2023, Pages 36-42]
-
Modified Gurson model (GTN)
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function [Volume 3, Issue 2, 2016, Pages 26-38]
-
Multilayer
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Multilayer
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Multi-layered foam filled tube
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading [Volume 6, Issue 2, 2019, Pages 62-81]
-
Multi-objective optimization
A hybrid approach based on numerical, statistical and intelligent techniques for optimization of tube drawing process to produced squared section from round tube [Volume 5, Issue 2, 2018, Pages 96-109]
-
Multi-objective optimization
A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
-
MWCNT
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
N
-
Nano-crystal
Plastic Deformation of Nano-Single Crystal Co-Cr-Ni- Fe-Mn High Entropy Alloy in Tension From 10 K to 1000 K by Atomistic Simulations [Volume 9, Issue 1, 2022, Pages 13-23]
-
Nano-indentation test
Comparison of Plastic Anisotropy and Crystallographic Texture Evolution of Aluminum 1100 Between 90° and 135° ECAE Processes [Volume 10, Issue 1, 2023, Pages 26-38]
-
Nanoparticle
Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength [Volume 9, Issue 4, 2022, Pages 34-43]
-
Nanoparticle Strengthened Nickel Alloy
Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
-
Nanoplates
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
-
Nanopowder
Parametric Study of Reinforcement of Keyhole-less Friction Stir Spot Welding using Al2O3 and TiO2 Nanopowders [Volume 10, Issue 2, 2023, Pages 55-67]
-
Nd:YAG laser
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Neural Computing
A Robust RBF-ANN Model to Predict the Hot Deformation Flow Curves of API X65 Pipeline Steel [Volume 4, Issue 1, 2017, Pages 12-20]
-
Nimonic 80A
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing [Volume 2, Issue 1, 2015, Pages 18-29]
-
Nonlinear regression
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing [Volume 4, Issue 1, 2017, Pages 28-38]
-
NSGA II
Multi-objective Pareto optimization of bone drilling process using NSGA II algorithm [Volume 5, Issue 2, 2018, Pages 72-83]
-
Numerical calculation
Pattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique [Volume 2, Issue 1, 2015, Pages 1-10]
-
Numerical modeling
Coupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys [Volume 6, Issue 2, 2019, Pages 10-19]
-
Numerical simulation
Finite element simulation of two-point incremental forming of free-form parts [Volume 5, Issue 2, 2018, Pages 26-35]
-
Numerical simulation
Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry [Volume 9, Issue 2, 2022, Pages 36-45]
O
-
ODF
Evaluation of TiAl3 Intermetallic Formation Mechanism and Revolution of Annealing Texture in Al/Ti Powder/Al Laminate Composite Fabricated by Cold Roll Bonding and Post-Annealing Treatment [Volume 9, Issue 2, 2022, Pages 14-25]
-
Oil storage tank
Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation [Volume 9, Issue 4, 2022, Pages 5-12]
-
Optimal steps
Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method [Volume 9, Issue 1, 2022, Pages 31-40]
-
Optimization
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Optimization
Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach [Volume 7, Issue 1, 2020, Pages 100-115]
-
Optimization
Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
-
Ovality
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Oxygen content
Hot Ductility Behavior of the Electrolytic Tough Pitch Copper Having Different Initial Oxygen Content [Volume 9, Issue 4, 2022, Pages 13-25]
P
-
Parameter Study
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
-
Parametric Study
Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
-
Pareto optimization
Multi-objective Pareto optimization of bone drilling process using NSGA II algorithm [Volume 5, Issue 2, 2018, Pages 72-83]
-
Particle-reinforcement
Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process [Volume 2, Issue 2, 2015, Pages 44-53]
-
Peeling test
An investigation on the bond strength of aluminum strips in presence of brass mesh after cold roll bonding [Volume 3, Issue 2, 2016, Pages 52-63]
-
Petroleum coke
A Study on the Effect of Coke Particle Size and Applied Compacting Pressure on the Physical Properties of Electrographite Brushes [Volume 10, Issue 2, 2023, Pages 12-21]
-
Phase-change
Meshless analysis of casting process considering non-Fourier heat transfer [Volume 3, Issue 2, 2016, Pages 13-25]
-
Phase distribution
Finite Element Analysis of Phase Distribution in Forging of the Two-Phase Ti-6Al-4V Alloy to have a Hip Joint Implant [Volume 9, Issue 4, 2022, Pages 26-33]
-
Pile-up
Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation [Volume 3, Issue 1, 2016, Pages 1-11]
-
Pin radius
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
-
Plasma
Investigation of Laser, Wire-cut and Plasma Cutting Methods on the Residual Stress Distribution of St37 Sheet Using the Contour Method [Volume 10, Issue 3, 2023, Pages 43-53]
-
Plastic deformation
Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response [Volume 1, Issue 1, 2014, Pages 32-45]
-
Plastic deformation
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function [Volume 3, Issue 2, 2016, Pages 26-38]
-
Plastic deformation
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading [Volume 6, Issue 2, 2019, Pages 62-81]
-
Plasticity
Iranian Journal of Materials Forming, Issue 4, October 2021 [Volume 8, Issue 4, 2021, Pages 2-3]
-
PMMA
The Effect of Strain Rate on the Tensile Properties of PMMA/Hydroxyapatite Composite [Volume 10, Issue 2, 2023, Pages 35-43]
-
Polyester resin
A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
-
Porosity measurement
The Effect of Simple Shear Extrusion on the Texture and Porosity Content of Al/Al2O3 Composites [Volume 9, Issue 2, 2022, Pages 26-35]
-
Porous Titanium
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function [Volume 3, Issue 2, 2016, Pages 26-38]
-
Powder metallurgy
Effect of Particle Size on the Compressibility and Sintering of Titanium Powders [Volume 6, Issue 2, 2019, Pages 42-51]
-
Powder metallurgy
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
Powder metallurgy
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Powder metallurgy
A Study on the Effect of Coke Particle Size and Applied Compacting Pressure on the Physical Properties of Electrographite Brushes [Volume 10, Issue 2, 2023, Pages 12-21]
-
Powder metallurgy technique
The Effect of Simple Shear Extrusion on the Texture and Porosity Content of Al/Al2O3 Composites [Volume 9, Issue 2, 2022, Pages 26-35]
-
Power law hardening model
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
-
Process
Iranian Journal of Materials Forming, Issue 3, July 2022 [Volume 9, Issue 3, 2022, Pages 2-3]
-
Process
Iranian Journal of Materials Forming, Issue 4, October 2022 [Volume 9, Issue 4, 2022, Pages 2-4]
-
Processing map
Hot Deformation Behavior of Ni80A Superalloy During Non-Isothermal Side Pressing [Volume 2, Issue 1, 2015, Pages 18-29]
-
Processing map
Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
-
Processing maps
Quantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps [Volume 5, Issue 1, 2018, Pages 36-46]
-
PTCAP
Constitutive Behavior of AZ31 Magnesium Tube Processed by Severe Plastic Deformation [Volume 9, Issue 3, 2022, Pages 44-51]
-
PVC fabric
Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation [Volume 9, Issue 4, 2022, Pages 5-12]
R
-
Radial Basis Function
A Robust RBF-ANN Model to Predict the Hot Deformation Flow Curves of API X65 Pipeline Steel [Volume 4, Issue 1, 2017, Pages 12-20]
-
Radial Basis Function
A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy [Volume 4, Issue 2, 2017, Pages 15-24]
-
Rail
Pattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique [Volume 2, Issue 1, 2015, Pages 1-10]
-
Rare earth metals
Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
-
Recovery
On the Substructure Development and Continuous Recrystallization in the Course of Selective Laser Melting of 316L Stainless Steel [Volume 10, Issue 1, 2023, Pages 61-69]
-
Recrystallization process
The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel [Volume 4, Issue 2, 2017, Pages 25-36]
-
Rectangular cross sections
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
-
Rectangular nanoplates
Wave Propagation in Rectangular Nanoplates Based on a New Strain Gradient Elasticity Theory with Considering in-Plane Magnetic Field [Volume 2, Issue 2, 2015, Pages 35-43]
-
Rectangular twist waveguide Simulation
Simulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die [Volume 6, Issue 2, 2019, Pages 52-61]
-
Rectangular vortex extrusion
Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
-
Recycled scrap tire
Tailoring of Eco-Friendly Epoxies with Synergistic Adhesion Strength [Volume 9, Issue 4, 2022, Pages 34-43]
-
Refined shear deformation theory
Bending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 1-13]
-
Regular cell distribution
Anisotropy in Elastic Properties of Porous 316L Stainless Steel Due to the Shape and Regular Cell Distribution [Volume 6, Issue 1, 2019, Pages 56-63]
-
Residual Stress
Cold work simulation of hole expansion process and its effect on crack closure [Volume 1, Issue 1, 2014, Pages 11-23]
-
Residual Stress
Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading [Volume 5, Issue 2, 2018, Pages 54-71]
-
Residual Stress
Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method [Volume 9, Issue 1, 2022, Pages 31-40]
-
Residual Stress
Investigation of Laser, Wire-cut and Plasma Cutting Methods on the Residual Stress Distribution of St37 Sheet Using the Contour Method [Volume 10, Issue 3, 2023, Pages 43-53]
-
Resistance spot welding
Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
-
Response surface Method
Strain Distribution for CP-Ti in Cyclic Extrusion Compression Angular Pressing by RSM [Volume 10, Issue 3, 2023, Pages 25-35]
-
Response surface methodology
Numerical and Experimental Investigation of the Effect of Open-Die Hot Deep Drawing Process Parameters on the Formability of Commercially Pure Titanium [Volume 7, Issue 1, 2020, Pages 24-31]
-
Response surface methodology
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
-
Response surface methodology
Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
-
Response surface methodology
Numerical Study and Optimization of the Thermomechanical Procedure in Forging of Two-Phase Ti-6Al-4V Alloy for Artificial Hip Joint Implant [Volume 9, Issue 3, 2022, Pages 31-43]
-
Ridges deformation energy
The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process [Volume 7, Issue 2, 2020, Pages 32-43]
-
Rietveld method
Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets [Volume 6, Issue 1, 2019, Pages 16-23]
-
Rolling
Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling [Volume 2, Issue 1, 2015, Pages 30-42]
-
Rotary-draw bending
Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube [Volume 7, Issue 1, 2020, Pages 70-83]
-
RUE
Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
-
Rupture prediction
New geometry for TCP: severe plastic deformation of tubes [Volume 3, Issue 2, 2016, Pages 64-78]
S
-
Saddle shaped surface
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
-
Segregation
Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
-
Segregation coefficient
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Selective laser melting (SLM)
On the Substructure Development and Continuous Recrystallization in the Course of Selective Laser Melting of 316L Stainless Steel [Volume 10, Issue 1, 2023, Pages 61-69]
-
Self-reacting friction stir welding
Joining of Commercial Pure Copper via Self-reacting Friction Stir Welding [Volume 7, Issue 2, 2020, Pages 44-55]
-
Semisolid flow behavior
Improving the Semisolid Deformation Behavior and Thixoformability of AZ61 Magnesium Alloy Through Controlling the Strain Induced Melt Activation Process [Volume 9, Issue 3, 2022, Pages 18-30]
-
Shan-Chen model Plastic deformation
Simulation of Foaming and Deformation for Composite Aluminum Foams [Volume 3, Issue 1, 2016, Pages 38-54]
-
Shape Rolling
An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade [Volume 7, Issue 2, 2020, Pages 16-25]
-
Shear punch test
Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation [Volume 3, Issue 1, 2016, Pages 65-74]
-
Shear punch test (SPT)
Thermo-Mechanical Treatment of AlCoCrFeNi2.1 High-Entropy Alloy [Volume 9, Issue 1, 2022, Pages 41-46]
-
Shear stress
Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
-
Sheet Drawing
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation [Volume 5, Issue 2, 2018, Pages 36-53]
-
Sheet hydroforming process
Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques [Volume 10, Issue 1, 2023, Pages 13-25]
-
Sheet Metal
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L [Volume 3, Issue 1, 2016, Pages 55-64]
-
Shell hydroforming
Integral Hydro-Bulge Forming of Spherical Vessels: A Numerical and Experimental Study [Volume 10, Issue 2, 2023, Pages 4-11]
-
Shortening mechanism
Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning [Volume 7, Issue 1, 2020, Pages 14-23]
-
Silver matrix composites
Synthesis and Consolidation of Ag/ZnO Composite Powders via SPS Method [Volume 8, Issue 3, 2021, Pages 26-33]
-
Simple Shear Extrusion
Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation [Volume 3, Issue 1, 2016, Pages 65-74]
-
Simple Shear Extrusion
The Effect of Simple Shear Extrusion on the Texture and Porosity Content of Al/Al2O3 Composites [Volume 9, Issue 2, 2022, Pages 26-35]
-
Simulation
A comparison between numerical and analytical modeling of ECAP [Volume 1, Issue 1, 2014, Pages 56-63]
-
Simulation
Numerical Simulation and Evaluation of Effective Parameters During Cold Drawing of 410 Stainless Steel Tubes [Volume 10, Issue 3, 2023, Pages 15-24]
-
Simulation in C++
Experimental Investigations on Stretchability of an Austentic Stainless Steel 316L [Volume 3, Issue 1, 2016, Pages 55-64]
-
Single action die pressing
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Single point incremental sheet forming
Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet [Volume 9, Issue 2, 2022, Pages 46-57]
-
Sink-in
Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation [Volume 3, Issue 1, 2016, Pages 1-11]
-
Sinterability
Effect of Particle Size on the Compressibility and Sintering of Titanium Powders [Volume 6, Issue 2, 2019, Pages 42-51]
-
Sintered brass
Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts [Volume 7, Issue 2, 2020, Pages 70-77]
-
SLM
Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM [Volume 7, Issue 2, 2020, Pages 78-87]
-
Small scale effects
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
-
Sobol sensitivity analysis method
Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
-
Solder alloy
Workability study in near-pritectic Sn-5%Sb lead-free solder alloy processed by severe plastic deformation [Volume 3, Issue 2, 2016, Pages 39-51]
-
Solidification cracking
Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy [Volume 7, Issue 1, 2020, Pages 54-69]
-
Solid solution
Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al [Volume 1, Issue 1, 2014, Pages 24-31]
-
Solid solution, Microstructure
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Space holder
Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams [Volume 9, Issue 1, 2022, Pages 5-12]
-
Spark plasma sintering
Synthesis and Consolidation of Ag/ZnO Composite Powders via SPS Method [Volume 8, Issue 3, 2021, Pages 26-33]
-
SPD
Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
-
Spiral irradiating scheme
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
-
Spiral path pitch
Fabrication of Saddle-Shaped Surfaces by Flame Forming Process [Volume 7, Issue 2, 2020, Pages 8-15]
-
Springback
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
-
Springback
A Study of the Effects of Grain Size, Sheet Thickness and Punch Radii on Springback in Copper Sheets [Volume 9, Issue 2, 2022, Pages 4-13]
-
Stacking fault energy
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels [Volume 1, Issue 1, 2014, Pages 1-10]
-
Stacking fault energy
Stacking Fault Energy and Microstructural Insight into the Dynamic Deformation of High-Manganese TRIP and TWIP Steels [Volume 2, Issue 1, 2015, Pages 51-61]
-
Stainless steel
Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel [Volume 9, Issue 3, 2022, Pages 62-73]
-
Stainless steel
On the Substructure Development and Continuous Recrystallization in the Course of Selective Laser Melting of 316L Stainless Steel [Volume 10, Issue 1, 2023, Pages 61-69]
-
Static analysis
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
-
Static strain aging
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Statistical analysis
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
Straightening process
Pattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique [Volume 2, Issue 1, 2015, Pages 1-10]
-
Strain analysis
Optimization of die geometry for tube channel pressing [Volume 5, Issue 1, 2018, Pages 26-35]
-
Strain compensated
Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition [Volume 8, Issue 2, 2021, Pages 54-63]
-
Strain distribution
New geometry for TCP: severe plastic deformation of tubes [Volume 3, Issue 2, 2016, Pages 64-78]
-
Strain distribution
Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]
-
Strain distribution
Strain Distribution for CP-Ti in Cyclic Extrusion Compression Angular Pressing by RSM [Volume 10, Issue 3, 2023, Pages 25-35]
-
Strain effect
Quantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps [Volume 5, Issue 1, 2018, Pages 36-46]
-
Strain gage
Pattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique [Volume 2, Issue 1, 2015, Pages 1-10]
-
Strain gradient elasticity theory
Static analysis of rectangular nanoplates using exponential shear deformation theory based on strain gradient elasticity theory [Volume 1, Issue 2, 2014, Pages 1-13]
-
Strain hardening
Plastic Deformation Modeling of Foam-Filled Tubes with Multi-Layer Foams During Compression Loading [Volume 6, Issue 2, 2019, Pages 62-81]
-
Strain homogeneity
Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation [Volume 6, Issue 1, 2019, Pages 32-43]
-
Strain Path
Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
-
Strain rate
The Effect of Strain Rate on the Tensile Properties of PMMA/Hydroxyapatite Composite [Volume 10, Issue 2, 2023, Pages 35-43]
-
Stream function
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation [Volume 5, Issue 2, 2018, Pages 36-53]
-
Stress concentration
Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
-
Stress relaxation
Interaction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel [Volume 2, Issue 1, 2015, Pages 43-50]
-
Subcritical tempering
Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering [Volume 7, Issue 2, 2020, Pages 2-7]
-
Superplastic forming
Failure Prediction during uniaxial Superplastic Tension using Finite Element Method [Volume 1, Issue 1, 2014, Pages 46-55]
-
Superplasticity
Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation [Volume 3, Issue 1, 2016, Pages 65-74]
-
Support Vector Machine
A SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy [Volume 4, Issue 2, 2017, Pages 15-24]
-
Surface composite
Statistical Analysis and Optimization of the Yield Strength and Hardness of Surface Composite Al7075/Al2O3 Produced by FSP via RSM and Desirability Approach [Volume 7, Issue 1, 2020, Pages 32-45]
-
SWCNT
Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes [Volume 7, Issue 2, 2020, Pages 88-103]
T
-
Tailor machined blank
Prediction of Bending Angle for Laser Forming of Tailor Machined Blanks by Neural Network [Volume 5, Issue 1, 2018, Pages 47-57]
-
Tailor welded blanks (TWBs), Gas tungsten arc welding
Influence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks [Volume 4, Issue 2, 2017, Pages 62-75]
-
Tailor Welded Blank (TWB)
A Novel Approach for Formability Prediction of Tailor Welded Blank [Volume 3, Issue 2, 2016, Pages 1-12]
-
TCAP
Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry [Volume 9, Issue 2, 2022, Pages 36-45]
-
Teaching-learning-based algorithm
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
-
Tensile Force
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
-
Tensile properties
Grain Refinement and Hall-Petch Strengthening of Magnesium Alloy Via Alloying and Hot Extrusion [Volume 6, Issue 2, 2019, Pages 2-9]
-
Texture
Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
-
Texture
The Simulation of Texture of Al0.3CoCrFeNi High Entropy Alloy after Cold Deformation using Visco-Plastic Self-Consistent Model [Volume 10, Issue 1, 2023, Pages 53-60]
-
Texture estimation
Study of Texture Weakening of Commercially Pure Copper Processed by Multiple Compressions in a Channel Die [Volume 8, Issue 4, 2021, Pages 15-25]
-
Texture parameter
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants [(Articles in Press)]
-
Thermomechanical processing
Grain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite [Volume 5, Issue 1, 2018, Pages 19-25]
-
Thermomechanical processing
Improving the Semisolid Deformation Behavior and Thixoformability of AZ61 Magnesium Alloy Through Controlling the Strain Induced Melt Activation Process [Volume 9, Issue 3, 2022, Pages 18-30]
-
Thermomechanical processing
Hot Ductility Behavior of the Electrolytic Tough Pitch Copper Having Different Initial Oxygen Content [Volume 9, Issue 4, 2022, Pages 13-25]
-
Thermomechanical treatment
Optimization of thermomechanical parameters to produce an ultra-high strength compressor disk [Volume 2, Issue 2, 2015, Pages 54-61]
-
Thermoplastic composites
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
-
Thickness
A Study of the Effects of Grain Size, Sheet Thickness and Punch Radii on Springback in Copper Sheets [Volume 9, Issue 2, 2022, Pages 4-13]
-
Thickness distribution
Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet [Volume 9, Issue 2, 2022, Pages 46-57]
-
Thickness distribution
Integral Hydro-Bulge Forming of Spherical Vessels: A Numerical and Experimental Study [Volume 10, Issue 2, 2023, Pages 4-11]
-
Thickness variation
A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes [Volume 7, Issue 1, 2020, Pages 46-53]
-
Thinning
Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet [Volume 9, Issue 2, 2022, Pages 46-57]
-
Thinning percentage
Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
-
Thixoforming
Improving the Semisolid Deformation Behavior and Thixoformability of AZ61 Magnesium Alloy Through Controlling the Strain Induced Melt Activation Process [Volume 9, Issue 3, 2022, Pages 18-30]
-
Ti-6Al-4V
Modeling of Corrosion-Fatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique [Volume 6, Issue 1, 2019, Pages 64-73]
-
Ti-6Al-4V
Numerical Study and Optimization of the Thermomechanical Procedure in Forging of Two-Phase Ti-6Al-4V Alloy for Artificial Hip Joint Implant [Volume 9, Issue 3, 2022, Pages 31-43]
-
Ti-6Al-4V
Finite Element Analysis of Phase Distribution in Forging of the Two-Phase Ti-6Al-4V Alloy to have a Hip Joint Implant [Volume 9, Issue 4, 2022, Pages 26-33]
-
Ti-6Al-4V alloy
Effect of Processing Parameters on the Morphology of α-phase in Ti-6Al-4V Alloy During the Two-step Hot Deformation [Volume 10, Issue 3, 2023, Pages 54-62]
-
Ti6Al4V-ELI
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants [(Articles in Press)]
-
Tikhonov-Morozov
Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method [Volume 9, Issue 1, 2022, Pages 31-40]
-
Time Dependent Loading
Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading [Volume 5, Issue 2, 2018, Pages 54-71]
-
Titanium
Effect of Particle Size on the Compressibility and Sintering of Titanium Powders [Volume 6, Issue 2, 2019, Pages 42-51]
-
Tool pin profile
Coupled Eulerian-Lagrangian (CEL) Modeling of Material Flow in Dissimilar Friction Stir Welding of Aluminum Alloys [Volume 6, Issue 2, 2019, Pages 10-19]
-
TOPSIS
Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques [Volume 10, Issue 1, 2023, Pages 13-25]
-
TOPSIS method
A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
-
Tough pitch copper
Hot Ductility Behavior of the Electrolytic Tough Pitch Copper Having Different Initial Oxygen Content [Volume 9, Issue 4, 2022, Pages 13-25]
-
Trapezoidal channel geometry
Investigation of Microstructure and Mechanical Properties of Al-6061 Tubes Processed by Tubular Channel Angular Pressing Process Having Trapezoidal Channel Geometry [Volume 9, Issue 2, 2022, Pages 36-45]
-
TRIP
Stacking Fault Energy and Microstructural Insight into the Dynamic Deformation of High-Manganese TRIP and TWIP Steels [Volume 2, Issue 1, 2015, Pages 51-61]
-
TRIP effect
Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing [Volume 7, Issue 1, 2020, Pages 92-99]
-
TRIP/TWIP steel
Influence of High Strain Rates on the Mechanical Behavior of High-Manganese Steels [Volume 1, Issue 1, 2014, Pages 1-10]
-
Tube
New geometry for TCP: severe plastic deformation of tubes [Volume 3, Issue 2, 2016, Pages 64-78]
-
Tube repair
A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
-
Tube sinking
A hybrid approach based on numerical, statistical and intelligent techniques for optimization of tube drawing process to produced squared section from round tube [Volume 5, Issue 2, 2018, Pages 96-109]
-
TWB
Evaluation of Effective Paramters on Formability of TWB [Volume 2, Issue 1, 2015, Pages 11-17]
-
TWBs
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks [Volume 5, Issue 2, 2018, Pages 85-95]
-
Twinning
Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
-
TWIP
Stacking Fault Energy and Microstructural Insight into the Dynamic Deformation of High-Manganese TRIP and TWIP Steels [Volume 2, Issue 1, 2015, Pages 51-61]
-
Twist die
Simulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die [Volume 6, Issue 2, 2019, Pages 52-61]
-
Two-layer Sheet
A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets [Volume 4, Issue 1, 2017, Pages 39-51]
-
Two-layer Sheet
Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet [Volume 9, Issue 2, 2022, Pages 46-57]
-
Two-parameter elastic foundation
Bending and Free Vibration Analyses of Rectangular Laminated Composite Plates Resting on Elastic Foundation Using a Refined Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 1-13]
-
Two-point incremental forming
Finite element simulation of two-point incremental forming of free-form parts [Volume 5, Issue 2, 2018, Pages 26-35]
-
Two point incremental forming (TPIF)
Two point incremental forming of a complicated shape with negative and positive dies [Volume 4, Issue 2, 2017, Pages 51-61]
-
Two-stage Refilling Friction Stir Spot Welding
Parametric Study of Reinforcement of Keyhole-less Friction Stir Spot Welding using Al2O3 and TiO2 Nanopowders [Volume 10, Issue 2, 2023, Pages 55-67]
-
Two-step bending
A novel method for laser forming of two-step bending of a dome shaped part [Volume 4, Issue 2, 2017, Pages 1-14]
-
Two-step hot deformation process
Effect of Processing Parameters on the Morphology of α-phase in Ti-6Al-4V Alloy During the Two-step Hot Deformation [Volume 10, Issue 3, 2023, Pages 54-62]
U
-
Ultimate tensile strength
Effect of friction stir welding parameters on the ultimate tensile strength of Al-Cu tailor welded blanks [Volume 5, Issue 2, 2018, Pages 85-95]
-
Ultrafine-grained materials
Ten years of severe plastic deformation (SPD) in Iran, part I: equal channel angular pressing (ECAP) [Volume 5, Issue 1, 2018, Pages 71-113]
-
Ultrafine-grained materials
Ten years of severe plastic deformation (SPD) in Iran, part II: accumulative roll bonding (ARB) [Volume 5, Issue 2, 2018, Pages 1-25]
-
Ultrafine-Grained (UFG)
Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling [Volume 2, Issue 1, 2015, Pages 30-42]
-
Ultrasonic Vibration
Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process [Volume 6, Issue 2, 2019, Pages 30-41]
-
Upper bound
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation [Volume 5, Issue 2, 2018, Pages 36-53]
-
Upper bound theorem
Prediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach [Volume 4, Issue 1, 2017, Pages 52-62]
-
Up quenching
Optimization of thermomechanical parameters to produce an ultra-high strength compressor disk [Volume 2, Issue 2, 2015, Pages 54-61]
-
Upsetting
Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
-
Urea Formaldehyde
A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM) [Volume 9, Issue 2, 2022, Pages 58-69]
-
U-Shaped
The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
V
-
Vibratory Stress Relief
Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
-
Vickers hardness
Finite element analysis of elastic-plastic solids under Vickers indentation: surface deformation [Volume 3, Issue 1, 2016, Pages 1-11]
-
Vortex extrusion
Prediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach [Volume 4, Issue 1, 2017, Pages 52-62]
-
Vortex extrusion
Analysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology [Volume 7, Issue 2, 2020, Pages 26-31]
W
-
Warm deep drawing (WDD)
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy [Volume 7, Issue 2, 2020, Pages 56-69]
-
Wave propagation
Wave Propagation in Rectangular Nanoplates Based on a New Strain Gradient Elasticity Theory with Considering in-Plane Magnetic Field [Volume 2, Issue 2, 2015, Pages 35-43]
-
Wear
Fabrication of the Cu-Zn multilayer and Cu-Zn alloy by accumulative roll bonding (ARB) with an emphasis on the wear behavior [Volume 1, Issue 2, 2014, Pages 52-62]
-
Wear Mechanism
Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads [Volume 9, Issue 1, 2022, Pages 47-54]
-
Wear rate
Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads [Volume 9, Issue 1, 2022, Pages 47-54]
-
Weld line movement
A Novel Approach for Formability Prediction of Tailor Welded Blank [Volume 3, Issue 2, 2016, Pages 1-12]
-
Wire-cut
Investigation of Laser, Wire-cut and Plasma Cutting Methods on the Residual Stress Distribution of St37 Sheet Using the Contour Method [Volume 10, Issue 3, 2023, Pages 43-53]
-
Wire drawing
Static Strain Aging Behavior of Low Carbon Steel Drawn Wire [Volume 1, Issue 2, 2014, Pages 44-51]
-
Work hardening
Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation [Volume 5, Issue 2, 2018, Pages 36-53]
X
-
X-ray diffraction
Microstructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets [Volume 6, Issue 1, 2019, Pages 16-23]
-
X-ray diffraction (XRD)
Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
-
XRD pattern
Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants [(Articles in Press)]
Z
-
Zerilli-Armstrong
The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
-
ZK60 alloy
Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions [Volume 6, Issue 1, 2019, Pages 24-31]
-
ZK60 alloy
Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads [Volume 9, Issue 1, 2022, Pages 47-54]
Your query does not match with any item