TY - JOUR ID - 4824 TI - Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process JO - Iranian Journal of Materials Forming JA - IJMF LA - en SN - AU - Sakhtemanian, M.R. AU - Amini, S. AU - Honarpisheh, M. AD - Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran. Y1 - 2018 PY - 2018 VL - 5 IS - 1 SP - 1 EP - 18 KW - Incremental Forming KW - Explosive-welded KW - Bimetals KW - low carbon steel/CP Titanium DO - 10.22099/ijmf.2017.26024.1085 N2 - In this study, the incremental forming of explosively welded low carbon steel-commercially pure titanium bilayer sheet has been experimentally and numerically investigated. For this purpose, at first a finite element based analysis was proposed to predict forming force and thickness distribution to form this material by such process, that showed good agreements with the experimental results. Then, to investigate the effect of vertical step down (ΔZ) parameter on the properties of the workpiece, mechanical tests and microstructural studies were performed on the formed specimens. The results showed that increasing the vertical step down (ΔZ), hardness and tensile properties of the specimens increased but the thickness reduction in the wall of the pyramidal specimens increased and also the surface quality decreased. In addition, microstructural studies showed that increasing the vertical step down from 0.1 to 0.3, the grain structure transformed from an equiaxed state to a fibrous state and led to formation of texture in the microstructure, which mechanical properties improvements can be attributed to this issue. Therefore, if the surface quality of the inside wall of the specimen won’t be important, with an increase in the amount of ΔZ besides reduction of process time, the mechanical properties of the specimen will be improved. UR - https://ijmf.shirazu.ac.ir/article_4824.html L1 - https://ijmf.shirazu.ac.ir/article_4824_919f019936f350be8046e4d8be949d56.pdf ER -