Iranian Journal of Materials Forming

26. Application of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets

Volume 6, Issue 2, Summer and Autumn 2019, Pages 20-29

10.22099/ijmf.2019.5428

Amin Jaferi; Z. Sadeghian; B. Lotfi

27. Nanotwins Formation in Accumulative Roll-Bonded Brass

Volume 4, Issue 1, Spring 2017, Pages 21-27

10.22099/ijmf.2017.3945

S. Pasebani; M. R. Toroghinejad; G. Dini

28. The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response

Volume 1, Issue 2, Autumn 2014, Pages 23-31

10.22099/ijmf.2014.2487

S.M.H. Mirbagheri; J. Khajehali

29. Formation of a solid solution through accumulative roll bonding (ARB) and post-heat treatment of multilayered Cu/Zn/Al

Volume 1, Issue 1, Spring 2014, Pages 24-31

10.22099/ijmf.2014.2277

M. Reihanian; M.M. Mahdavian; L. Ghalandari; A. Obeidavi

30. Investigation of Ca in the Microstructural Evolution and Porosity Analysis of ZK60 Alloy in As-Cast and Extruded Conditions

Volume 6, Issue 1, Winter and Spring 2019, Pages 24-31

10.22099/ijmf.2019.22884.1067

S. Moradnezhad; A. Razaghian; M. Emamy; R. Taghiabadi

31. The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel

Volume 4, Issue 2, Autumn 2017, Pages 25-36

10.22099/ijmf.2017.4290

R. Mohammadi Ahmadabadi; M. Naderi; J. Aghazadeh Mohandesi; J. Cabrera

32. Simulation of deformation behavior of porous Titanium using Modified Gurson yield function

Volume 3, Issue 2, Autumn 2016, Pages 26-38

10.22099/ijmf.2016.3861

Ehsan Ansari Basir; Keivan Narooei

33. Optimization of die geometry for tube channel pressing

Volume 5, Issue 1, Winter and Spring 2018, Pages 26-35

10.22099/ijmf.2018.26954.1093

M. H. Farshidi

34. Investigation of Effective Parameters of the Two-Layer Sheet Hydroforming Process for Hollow Parts with Complex Geometry

Volume 2, Issue 2, Autumn 2015, Pages 27-34

10.22099/ijmf.2015.3238

M. Saghari; A. Afsari

35. A comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy

Volume 3, Issue 1, Spring 2016, Pages 27-37

10.22099/ijmf.2016.3682

M. Rakhshkhorshid; A.R. Maldar

36. Forming of Multi layer Sheet Metal by Drawing Process: an Analysis and FEM Simulation

Volume 5, Issue 2, Summer and Autumn 2018, Pages 36-53

10.22099/ijmf.2018.30104.1106

Y. Mollapour; D. Afshari; H. Haghighat

37. Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing

Volume 4, Issue 1, Spring 2017, Pages 28-38

10.22099/ijmf.2017.3997

M. Seyed Salehi; N. Anjabin

38. Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling

Volume 2, Issue 1, Spring 2015, Pages 30-42

10.22099/ijmf.2015.2913

A.A. Khamei; K. Dehghani; S. Bakhshi; K. Kalayeh

39. Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process

Volume 6, Issue 2, Summer and Autumn 2019, Pages 30-41

10.22099/ijmf.2019.32460.1124

Mahdi Vahdati

40. Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response

Volume 1, Issue 1, Spring 2014, Pages 32-45

10.22099/ijmf.2014.2278

S.Mohammad Hossein mirbagheri; Mohammad javad Khajehali

41. Dynamic recrystallization kinetics of AISI 403 stainless steel using hot compression test

Volume 1, Issue 2, Autumn 2014, Pages 32-43

10.22099/ijmf.2014.2488

E. Kevanlo; G.R. Ebrahimi; S.A.A. Sani; A. Momeni

42. Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation

Volume 6, Issue 1, Winter and Spring 2019, Pages 32-43

10.22099/ijmf.2019.29949.1103

M. Shaban Ghazani

43. Wave Propagation in Rectangular Nanoplates Based on a New Strain Gradient Elasticity Theory with Considering in-Plane Magnetic Field

Volume 2, Issue 2, Autumn 2015, Pages 35-43

10.22099/ijmf.2015.3239

M. Janghorban; M. R. Nami

44. Quantitative analysis of thermo-mechanical behavior in 414 stainless steel using flow curves and processing maps

Volume 5, Issue 1, Winter and Spring 2018, Pages 36-46

10.22099/ijmf.2018.26530.1092

M. Chegini; M.R. Aboutalebi; S.H. Seyedein; G.R. Ebrahimi

45. The Experimental and Numerical Study of Hexagonal Cutting Of AISI 316L Steel Round Bars

Volume 4, Issue 2, Autumn 2017, Pages 37-50

10.22099/ijmf.2017.24628.1076

M. Ruin Aheli; M. A. Mirzai; S. J. Hemmati

46. Simulation of Foaming and Deformation for Composite Aluminum Foams

Volume 3, Issue 1, Spring 2016, Pages 38-54

10.22099/ijmf.2016.3698

Hossein Bayani; seyed mohammad Hossein Mirbagheri

47. Workability study in near-pritectic Sn-5%Sb lead-free solder alloy processed by severe plastic deformation

Volume 3, Issue 2, Autumn 2016, Pages 39-51

10.22099/ijmf.2016.3862

Hossein Vafaeenezhad; S. H. Seyedein; M. .R. Aboutalebi; A. R. Eivani

48. Determination of Residual Stress for Single and Double Autofrettage of Thick-walled FG Cylinders Subjected to Dynamic Loading

Volume 5, Issue 2, Summer and Autumn 2018, Pages 54-71

10.22099/ijmf.2018.30353.1107

S. H. Razi Mousavi; M. Mahzoon; M. H. Kadivar

49. A Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets

Volume 4, Issue 1, Spring 2017, Pages 39-51

10.22099/ijmf.2017.3998

H. Deilami Azodi; R. Darabi

50. Effect of Particle Size on the Compressibility and Sintering of Titanium Powders

Volume 6, Issue 2, Summer and Autumn 2019, Pages 42-51

10.22099/ijmf.2019.34264.1134

Iman Kaseb; Mohammad Moazami-Goudarzi; Alireza Abbasi

Journal Archive

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)

Volume 1 (2014)