Effect of Green Body Formation by Single and Double Action Pressing on the Mechanical Properties of Al Foams

Document Type : Research Paper

Authors

Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran

Abstract

In the present study, aluminum foams with a relative density of 0.38 were fabricated through powder metallurgy route by using carbamides as space holders. The effect of using double and single action die pressing methods to produce green compacts, were studied on the mechanical and energy absorption capacity of the fabricated foams. Carbamide space holders were removed by being leached in water, whereafter the samples were sintered at 640oC for 2 hours in air. Mechanical properties and energy absorption capability of the fabricated foam samples were evaluated by the means of compression test. The results proved that double action die pressing method can significantly improve mechanical properties and energy absorption capacity of the fabricated foam by creating more uniform density distribution in foam structure. Therefore, for foams with a relative density of 0.38, using double action die pressing process caused nearly 95 % increase in plateau stress and more than 24% improvement in energy absorption ability for the fabricated foam.

Keywords


[1] M. Street, G. Davies, Metallic foams: their production, properties and applications, Journal of Materials science, 18(7) (1983) 1899-1911.
[2] L.P. Lefebvre, J. Banhart, D.C. Dunand, Porous metals and metallic foams: Current status and recent developments, Advanced Engineering Materials, 10(9) (2008) 775-787.
[3] M. Guden, E. Celik, S. Cetiner, A. Aydin, Metals foams for biomedical applications: Processing and mechanical properties, Biomaterials, Springer, Boston, MA, 2004 pp. 257-266.
[4] J. Parthasarathy, B. Starly, S. Raman, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, Journal of Manufacturing Processes, 13(2) (2011) 160-170.
[5] J. Qin, Q. Chen, C. Yang, Y. Huang, Research process on property and application of metal porous materials, Journal of Alloys and Compounds, 654 (2016) 39-44.
[6] W.C. Tan, L.H. Saw, H.S. Thiam, J. Xuan, Z. Cai, and M.C. Yew, Overview of porous media/metal foam application in fuel cells and solar power systems, Renewable and Sustainable Energy Reviews, 96 (2018) 181-197.
[7] Y. An, H. Fei, G. Zeng, X. Xu, L. Ci, B. Xi, S. Xiong, J. Feng, Y. Qian, Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries,” Nano Energy, 47 (2018) 503-511.
[8] S.Y. He, Y. Zhang, G. Dai, J.Q. Jiang, Preparation of density-graded aluminum foam, Materials Science and Engineering: A, 618 (2014) 496-499.
[9] Y. Hangai, K. Takahashi, T. Utsunomiya, S. Kitahara, O. Kuwazuru, and N. Yoshikawa, Fabrication of functionally graded aluminum foam using aluminum alloy die castings by friction stir processing, Materials Science and Engineering: A, 534 (2012) 716-719.
[10]      Y. Hangai, K. Takahashi, R. Yamaguchi, T. Utsunomiya, S. Kitahara, O. Kuwazuru, N. Yoshikawa, Nondestructive observation of pore structure deformation behavior of functionally graded aluminum foam by X-ray computed tomography,” Materials Science and Engineering: A, 556 (2012) 678-684.
[11]      Y. Hangai, T. Morita, T. Utsunomiya, Functionally graded aluminum foam consisting of dissimilar aluminum alloys fabricated by sintering and dissolution process, Materials Science and Engineering: A, 696 (2017) 544-551.
[12]      A. Pollien, Y. Conde, L. Pambaguian, A. Mortensen, Graded open-cell aluminium foam core sandwich beams,” Materials Science and Engineering: A, 404(1-2) (2005) 9-18.
[13]      J. Banhart, Manufacture, characterisation and application of cellular metals and metal foams, Progress in Materials Science, 46(6) (2001) 559-632.
[14]      R. Surace, L.A.C. De Filippis, A.D. Ludovico, G. Boghetich, Influence of processing parameters on aluminium foam produced by space holder technique, Materials & Design, 30(6) (2009) 1878-1885.
[15]      Y.Y. Zhao, D.X. Sun, “A novel sintering-dissolution process for manufacturing Al foams, Scripta Materialia, 44(1) (2001) 105-110.
[16]      D.X. Sun, Y.Y. Zhao, Static and dynamic energy absorption of Al foams produced by the sintering and dissolution process, Metallurgical and Materials Transactions B, 34(1) (2003) 69-74.
[17]      B. Jiang, N.Q. Zhao, C.S. Shi, J.J. Li, Processing of open cell aluminum foams with tailored porous morphology, Scripta Materialia, 53(6) (2005) 781-785.
[18]      H.I. Bakan, A novel water leaching and sintering process for manufacturing highly porous stainless steel, Scripta Materialia, 55(2) (2006) 203-206.
[19]      B. Jiang, Z. Wang, N. Zhao, “Effect of pore size and relative density on the mechanical properties of open cell aluminum foams,” Scripta Materialia, 56(2) (2007) 169-172.
[20]      H. Bafti, A. Habibolahzadeh, Production of aluminum foam by spherical carbamide space holder technique-processing parameters, Materials & Design, 31(9) (2010) 4122-4129.
[21]      H. Bafti, A. Habibolahzadeh, “Compressive properties of aluminum foam produced by powder-Carbamide spacer route,” Materials & Design (1980-2015), 52 (2013) 404-411.
[22]      Y. Zhao, F. Han, T. Fung, Optimisation of compaction and liquid-state sintering in sintering and dissolution process for manufacturing A1 foams, Materials Science and Engineering: A, 364(1-2) (2004) 117-125.
[23]      F. Hassanli, M.H. Paydar, Improvement in energy absorption properties of aluminum foams by designing pore-density distribution, Journal of Materials Research and Technology, 14 (2021) 609-619.
[24]      J.W. Li, X.Z. An, Double-action die compaction of Fe-Al composite powder- a study by MPFEM simulation, 3rd Annual International Conference on Advanced Material Engineering (AME 2017), Atlantis Press, 2017.
[25]      L. Bonaccorsi, E. Proverbio, Powder compaction effect on foaming behavior of uni-axial pressed PM precursors, Advanced Engineering Materials, 8(9) (2006) 864-869.
[26]      K. Rahmani, A. Sadooghi, M. Nokhberoosta, The effect of the double-action pressure on the physical, mechanical and tribology properties of Mg-WO3 nanocomposites, Journal of Materials Research and Technology, 9(1) (2019) 1104-1118.
[27]      M. Mirzaei, M.H. Paydar, A novel process for manufacturing porous 316 L stainless steel with uniform pore distribution, Materials & Design, 121 (2017) 442-449.
[28]      M. Mirzaei and M.H. Paydar, Fabrication and characterization of core–shell density-graded 316L stainless steel porous structure,” Journal of Materials Engineering and Performance, 28(1) (2019) 221-230.
[29]      International Organization for Standardization, 2011, Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals.
[30]      J.Z. Wang, H.Q. Yin, X.H. Qu, J.L. Johnson, Effect of multiple impacts on high velocity pressed iron powder, Powder Technology, 195(3) (2009) 184-189, 2009.
[31]      R. Zhou, L. Zhang, Y. Liu, Residual stress in powder metallurgy green compact, Applied Mechanics and Materials, 44-47 (2010) 232-236.
[32]      P.A. Partha, B.M. Rajaprakash, Numerical simulation of double action powder compaction process, International Journal of Scientific Research in Science, Engineering and Technology, 1(1) (2016) 46-51.
[33]      P. Li, Z. Wang, N. Petrinic, C.R. Siviour, Deformation behaviour of stainless steel microlattice structures by selective laser melting,” Materials Science and Engineering: A, 614 (2014) 116-121.
[34]      J. Miltz, O. Ramon, Energy absorption characteristics of polymeric foams used as cushioning materials, Polymer Engineering & Science, 30(2) (1990) 129-133.
[35]      G. Singh and P.M. Pandey, Uniform and graded copper open cell ordered foams fabricated by rapid manufacturing: surface morphology, mechanical properties and energy absorption capacity, Materials Science and Engineering: A, 761 (2019) 138035.
[36]      J. Liu, Q. Qu, Y. Liu, R. Li, B. Liu, Compressive properties of Al-Si-SiC composite foams at elevated temperatures,” Journal of Alloys and Compounds, 676 (2016) 239-244.
[37]      X.C. Xia, X.W. Chen, Z. Zhang, X. Chen, W.M. Zhao, B. Liao, and B. Hur, Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam, Journal of Magnesium and Alloys, 1(4) (2013) 330-335.
[38]       M.G. Nava, A. Cruz-Ramírez, M.Á.S. Rosales, V.H. Gutiérrez-Pérez, A. Sánchez-Martínez, Fabrication of aluminum alloy foams by using alternative thickening agents via melt route,” Journal of Alloys and Compounds, 698 (2017) 1009-1017.