[1] J. A. Schey, Tribology in Metalworking: Friction, Lubrication and Wear, American Society for Metals, The
United States, (1983).
[2] E. Siebel, Resistance and deformation and the flow material during rolling, Stahl und Eisen, 50 (1930) 1769–
1775.
[3] Th. Von Karman, on the theory of rolling, Zeitschrift für Angewandte Mathematik und Mechanik, 5 (1925) 139–
141.
[4] X. Tan, Comparisons of friction models in bulk metal forming, Tribology International, 35 (2002) 385–393.
[5] R. Geiger, Metal Flow in Combined Can Extrusion, Reports from the Institute for Forming Technology of the
University Stuttgart Nr. 36, Girardet Essen Germany, (1976).
[6] K. Manisekar and R. Narayanasamy, Phenomenon of barreling in square billets of aluminium during cold upset
forging, International Journal Advanced Manufacturing Technology, 21 (2003) 84–90.
[7] S. Malayappan and R. Narayanasamy, An experimental analysis of upset forging of aluminium cylindrical billets
considering the dissimilar frictional conditions at flat die surfaces, International Journal Advanced
Manufacturing Technology, 23 (2004) 636–643.
[8] S. Malayappan and G. Esakkimuthu, Barreling of aluminium solid cylinders during cold upsetting with
differential frictional conditions at the faces, International Journal Advanced Manufacturing Technology, 29
(2006) 41–48.
[9] M. Kunogi, Reports of the Scientific Research Institute, Tokyo, 30 (1954) 63.
[10] N. Bay, The state of the art in cold forging lubrication, Journal of Materials Processing Technology, 46 (1994)
19–40.
[11] L. Wang, J. Zhou, J. Duszczyk and L. Katgerman, Friction in aluminium extrusion—Part 1: A review of friction
testing techniques for aluminium extrusion, Tribology International, 56 (2012) 89–98.
[12] R. Ebrahimi and A. Najafizadeh, A new method for evaluation of friction in bulk metal forming, Journal of
Materials Processing Technology, 152 (2004) 136–143.
[13]K. Manisekar and R. Narayanasamy, Effect of friction on barreling in square and rectangular billets of aluminum
during cold upset forging, Materials & Design, 28 (2007) 592–598.
[14]Sh. Koayashi, Soo-IK Oh and T. Altan, Metal Forming and the Finite-Element Method, Oxford Series on
Advanced Manufacturing, (1989).
[15]N. Bay, Friction stress and normal stress in bulk metal forming processes, Journal of Mechanical Working
Technology, 14 (1987) 203–223.
[16]K. P. Rao and K. Sivaram, A review of ring-compression testing and applicability of the calibration curves,
Journal of Materials Processing Technology, 37 (1993) 295–318.
[17]DEFORM-2D V9.0., Scientific Forming Technologies Corporation (SFTC).
[18]N. Pardis and R. Ebrahimi, Deformation behavior in simple shear extrusion (SSE) as a new severe plastic
deformation technique, Materials Science and Engineering A, 527 (2009) 355–360.
[19]M. L. Ghobrial, J. Y. Lee, T. Altan, N. Bay and B. G. Hansen, Factors affecting the double cup extrusion test for
evaluation of friction in cold and warm forging, CIRP Annals - Manufacturing Technology, 42 (1993) 347-351.
[20]A. Buschhausen, K. Weinmann, J. Y. Lee and T. Altan, Evaluation of lubrication and friction in cold forging
using a double backward extrusion process, Journal of Materials Processing Technology, 33 (1992) 95–108.
[21] T. Schrader, M. Shirgaokar and T. Altan, A critical evaluation of the double cup extrusion test for selection of
cold forging lubricants, Journal of Materials Processing Technology, 189 (2007) 36–44.
)
