Iranian Journal of Materials Forming

Articles in Press: ALL Accepted Manuscript Corrected Proof

Investigation of Parameters Influencing Forming Force and Thickness Distribution in Single Point Incremental Forming of AA3105-St12 Two-Layer Sheet

Volume 9, Issue 2, April 2022, Pages 46-57

10.22099/ijmf.2022.42993.1215

H. Deilami Azodi; S. Rezaei; A. Zeinolabedin Beygi; H. Badparva

Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads

Volume 9, Issue 1, January 2022, Pages 47-54

10.22099/ijmf.2022.42285.1204

S. Abdi; M. Ardestani; M. Tamizifar; A. Abbasi

Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach

Volume 8, Issue 1, January 2021, Pages 50-64

10.22099/ijmf.2020.38036.1164

Farzad Tatar; Amir-Hossein Mahmoudi; Alireza Shooshtari

Effect of Cold-Rolling and Annealing Treatments on the Microstructure and Mechanical Properties of AISI 309S Austenitic Stainless Steel

Volume 9, Issue 3, July 2022, Pages 52-61

10.22099/ijmf.2022.43813.1228

M. Eskandari; I. Khosravi-Bigdeli; S.R. Alavi Zaree; M. Yeganeh

The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite

Volume 8, Issue 3, July 2021, Pages 53-66

10.22099/ijmf.2021.40958.1186

Hamed Dalvand; Sajad Rasaee

Analysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy

Volume 7, Issue 1, April 2020, Pages 54-69

10.22099/ijmf.2019.34780.1139

M. Taheri; A. Halvaee; S. F. Kashani-Bozorg; M Paidar

Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition

Volume 8, Issue 2, April 2021, Pages 54-63

10.22099/ijmf.2021.39380.1171

Sajad Rasaee; AmirHossein Mirzaei

Effect of Processing Parameters on the Morphology of α-phase in Ti-6Al-4V Alloy During the Two-step Hot Deformation

Volume 10, Issue 3, July 2023, Pages 54-62

10.22099/ijmf.2024.49049.1277

H.R. Ezatpour; G.R. Ebrahimi; F. Zarghani

Parametric Study of Reinforcement of Keyhole-less Friction Stir Spot Welding using Al2O3 and TiO2 Nanopowders

Volume 10, Issue 2, April 2023, Pages 55-67

10.22099/ijmf.2023.47414.1257

M. Salehi; S.M.H. Seyedkashi; M. Sajed; H. Rastegari

Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy

Volume 7, Issue 2, October 2020, Pages 56-69

10.22099/ijmf.2020.38174.1166

Hamidreza Rezaei Ashtiani; M. Ganji Arjenki

Optimization and Investigation of the Initial Parameters Effects on Machining Forces in Aerial Graphite Part

Volume 9, Issue 4, October 2022, Pages 56-68

10.22099/ijmf.2023.45211.1244

M. Esmailian; M. Honarpisheh; A. Gheysarian

A Numerical Study on the Effect of Urea Formaldehyde Microcapsules Filling Ratio on the Deformation of Epoxy Composites using Finite Element Method (FEM)

Volume 9, Issue 2, April 2022, Pages 58-69

10.22099/ijmf.2022.42996.1216

E. Katoueizadeh; M. Ebadi; S.M. Zebarjad; K. Janghorban

On the Substructure Development and Continuous Recrystallization in the Course of Selective Laser Melting of 316L Stainless Steel

Volume 10, Issue 1, January 2023, Pages 61-69

10.22099/ijmf.2023.47020.1255

Z. Abbasi; H.R. Abedi

Comparing the Capability of Phenomenological (Johnson-Cook and Arrhenius-Type) and Artificial Neural Network Models in Predicting the Hot Deformation Behavior of Additively Manufactured 316L Stainless Steel

Volume 9, Issue 3, July 2022, Pages 62-73

10.22099/ijmf.2022.43705.1231

A. Esmaeilpour; H.R. Abedi

Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach

Volume 8, Issue 4, October 2021, Pages 63-75

10.22099/ijmf.2021.41242.1190

Ehsan Sherkatghanad; Hasan Moslemi Naeini; Amir Hossein Rabiee; Ali Zeinolabedin Beygi; Vahid Zal; Lihui Lang

Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation

Volume 8, Issue 1, January 2021, Pages 65-74

10.22099/ijmf.2021.38862.1170

Towhid Faraji Shovay; Sina Ghaemi Khiavi; Esmaeil Emadoddin; Hamid-Reza M. Semnani

Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube

Volume 7, Issue 1, April 2020, Pages 70-83

10.22099/ijmf.2019.34008.1132

S. M. Seyyedhatami; H. Lexian

Study on the Microstructure of Hot Deformed Cu-28Zn Prealloyed Powder Compacts

Volume 7, Issue 2, October 2020, Pages 70-77

10.22099/ijmf.2020.37740.1159

Rozita Rouzegar; Maziyar Azadbeh; Amirhossein Aref

Parameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM

Volume 7, Issue 2, October 2020, Pages 78-87

10.22099/ijmf.2020.36155.1148

Mehran Araghi; Ali Nayebi; Hojatollah Rokhgireh

Kinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel

Volume 7, Issue 1, April 2020, Pages 84-91

10.22099/ijmf.2020.35660.1145

M. A. Sohrabizadeh; Y. Mazaheri; M. Sheikhi

Structural Mechanics Approach to Investigate the Hyperelastic Mechanical Behavior of Single and Multi-wall Carbon Nanotubes

Volume 7, Issue 2, October 2020, Pages 88-103

10.22099/ijmf.2020.37930.1163

Masoumeh Rashidi; Keivan Narooei

Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing

Volume 7, Issue 1, April 2020, Pages 92-99

10.22099/ijmf.2020.35487.1142

M. J. Sohrabi; H. Mirzadeh; Ch. Dehghanian

Multi-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach

Volume 7, Issue 1, April 2020, Pages 100-115

10.22099/ijmf.2020.35736.1146

A. Mostafapour; M. Moradi; H. Kamali; M. Saleh Meiabadi; A. Kaplan

Influence of Machining Parameters on the Structural Changes of Bio-Titanium Dental Implants

Articles in Press, Accepted Manuscript, Available Online from 12 March 2024

10.22099/ijmf.2024.48482.1270

S. Alizadeh; M. Shahbaz; M. Kavanlouei; S.S. Rahimi

View Article

Journal Archive

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)

Volume 1 (2014)