Author Index

A

  • Abbasi, Seyed Mahdi Accelerated Homogenization of a Cast Nickel-Based Superalloy VDM780 via Thermomechanical Processing [Volume 12, Issue 3, 2025, Pages 33-41]
  • Abedi, Hamid Reza Accelerated Homogenization of a Cast Nickel-Based Superalloy VDM780 via Thermomechanical Processing [Volume 12, Issue 3, 2025, Pages 33-41]
  • Abedini, R. Statistical Modeling and Optimization of Variables Affecting Surface Hardness and Corrosion Resistance of 316L Stainless Steel in Ultrasonic Shot Peening Process Using Desirability Approach [Volume 12, Issue 1, 2025, Pages 28-36]
  • Abedini Nia, Sina Effect of Polymeric Additives on the Rheological Behavior of PZT Pastes for Extrusion Fiber Processing: Optimization by Taguchi Method [Volume 12, Issue 4, 2025, Pages 4-19]
  • Afgarazordeh, Mozhgan Densification Behavior of Fused Silica: Effects of Particle Size, Compaction Pressure, Sintering Temperature/Time, and Boron Oxide Addition [Volume 12, Issue 4, 2025, Pages 44-53]
  • Aghaie-khafri, Mehrdad Role of Constitutive Modeling on the Analysis of Shear Localization in Semi-Solid Deformation [Volume 12, Issue 2, 2025, Pages 4-14]
  • Ahmadi, Fatemeh Hot Deformation Behavior of an API X70 Steel: A Processing Map Approach [Volume 12, Issue 4, 2025, Pages 20-33]
  • Alavi Zaree, Seyed Reza Activation Energy and Zener-Hollomon Mapping of Hot-Deformed API X80 Steel Using Modified Hyperbolic Sine Constitutive Models [Volume 12, Issue 3, 2025, Pages 56-68]
  • Alavi Zaree, Seyed Reza Hot Deformation Behavior of an API X70 Steel: A Processing Map Approach [Volume 12, Issue 4, 2025, Pages 20-33]
  • Alimirzaloo, Vali Effect of Constrained Groove Pressing on Anisotropy and Formability of Al-1050: Insights from Forming Limit Diagrams [Volume 12, Issue 2, 2025, Pages 58-67]
  • Alimirzaloo, Vali The effect of a New Hybrid Severe Plastic Deformation Method on the Microstructure and Mechanical Properties of CP-Ti [Volume 12, Issue 4, 2025, Pages 54-65]
  • Alizadeh Kaklar, Javad The effect of a New Hybrid Severe Plastic Deformation Method on the Microstructure and Mechanical Properties of CP-Ti [Volume 12, Issue 4, 2025, Pages 54-65]
  • Amini, S. Tribology Characteristics of Ultrasonic Impact Treated Co-Based L-605 Superalloy [Volume 12, Issue 1, 2025, Pages 37-50]
  • Anjabin, Nozar Microstructure and mechanical properties of Al-TiC composite fabricated by accumulated extrusion bonding (AEB) [Volume 12, Issue 4, 2025, Pages 34-43]
  • Aryanpour Kashani, S. Mechanical Properties and Residual Stress Measurement in the Friction Stir Welding Process of Al 6061-T6 Plates with Copper and Brass Interlayer [Volume 12, Issue 1, 2025, Pages 51-64]

B

  • Bakhtiari, Meisam Micromechanical Modeling of Two-Way Shape Memory Response of Semi-Crystalline Polymers Based on Equivalent Inclusion Method [Volume 12, Issue 3, 2025, Pages 42-55]
  • Bonyani, Maryam Mechanical and Thermal Characteristics of Clay-Incorporated Vinyl Ester Composite [Volume 12, Issue 2, 2025, Pages 15-21]

C

  • Chavilian, Hooman Accelerated Homogenization of a Cast Nickel-Based Superalloy VDM780 via Thermomechanical Processing [Volume 12, Issue 3, 2025, Pages 33-41]

D

  • Dastmard, Amirmohammad A Comprehensive Study on the Effect of Wire EDM Current Intensity on the Tribological Behavior and Energy Efficiency in Aluminum Machining: A Novel Approach Toward Sustainable Manufacturing [Volume 12, Issue 4, 2025, Pages 66-80]

E

  • Ebrahimi, R. Iranian Journal of Materials Forming, Issue 1, January 2025 [Volume 12, Issue 1, 2025, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 2, April 2025 [Volume 12, Issue 2, 2025, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 3, July 2025 [Volume 12, Issue 3, 2025, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 4, October 2025 [Volume 12, Issue 4, 2025, Pages 2-3]
  • Eskandari, Hamed Activation Energy and Zener-Hollomon Mapping of Hot-Deformed API X80 Steel Using Modified Hyperbolic Sine Constitutive Models [Volume 12, Issue 3, 2025, Pages 56-68]
  • Eskandari, Mostafa Hot Deformation Behavior of an API X70 Steel: A Processing Map Approach [Volume 12, Issue 4, 2025, Pages 20-33]

F

  • Fardi Ilkhchi, A. Deformation Behavior of Aluminum Alloy During Severe Plastic Deformation by Integrated Equal Channel Angular Pressing and Extrusion (ECAP-Extrusion) [Volume 12, Issue 1, 2025, Pages 18-27]

G

  • Gerdooei, Mahdi Effect of Constrained Groove Pressing on Anisotropy and Formability of Al-1050: Insights from Forming Limit Diagrams [Volume 12, Issue 2, 2025, Pages 58-67]

H

  • Hajizadeh, Kaveh The effect of a New Hybrid Severe Plastic Deformation Method on the Microstructure and Mechanical Properties of CP-Ti [Volume 12, Issue 4, 2025, Pages 54-65]
  • Hayati, Raziye Effect of Polymeric Additives on the Rheological Behavior of PZT Pastes for Extrusion Fiber Processing: Optimization by Taguchi Method [Volume 12, Issue 4, 2025, Pages 4-19]
  • Heidarzadeh, َA. Deformation Behavior of Aluminum Alloy During Severe Plastic Deformation by Integrated Equal Channel Angular Pressing and Extrusion (ECAP-Extrusion) [Volume 12, Issue 1, 2025, Pages 18-27]
  • Honarpisheh, M. Mechanical Properties and Residual Stress Measurement in the Friction Stir Welding Process of Al 6061-T6 Plates with Copper and Brass Interlayer [Volume 12, Issue 1, 2025, Pages 51-64]

J

  • Jafari, Ali Microstructure and mechanical properties of Al-TiC composite fabricated by accumulated extrusion bonding (AEB) [Volume 12, Issue 4, 2025, Pages 34-43]

K

  • Karimi, A. Study on the Effect of Fabrication Method on the Polarization of Solid Oxide Fuel Cells [Volume 12, Issue 1, 2025, Pages 4-9]
  • Khandaei, Mehrdad Ring Expansion with a Stepped Conical Punch to Extract the Workability Diagram in Bulk Metal Forming for C22000 Alloy: Experiments and Numerical Simulation with Ductile Damage Model [Volume 12, Issue 3, 2025, Pages 20-32]
  • Khodabandeh, A The Effect of Tungsten on Microstructure and Mechanical Properties of Sintered Tantalum by Hot Pressing in a Vacuum [Volume 12, Issue 1, 2025, Pages 10-17]

L

  • Lexian, Hosein Ring Expansion with a Stepped Conical Punch to Extract the Workability Diagram in Bulk Metal Forming for C22000 Alloy: Experiments and Numerical Simulation with Ductile Damage Model [Volume 12, Issue 3, 2025, Pages 20-32]
  • Limooei, Mohammad Bagher Development of a Modified Relationship Between the Constant Friction Factor and the Coefficient of Friction in Extrusion Using Upper Bound Analysis [Volume 12, Issue 3, 2025, Pages 69-73]

M

  • Mahdavinejad, Ramezan Ali Residual Stress Analysis in Milled DIN 1.2344 Die Casting Mold: A Fusion of Numerical Simulation and XRD Experimental Validation [Volume 12, Issue 2, 2025, Pages 42-57]
  • Mahdavinejad, Ramezan Ali A Comprehensive Study on the Effect of Wire EDM Current Intensity on the Tribological Behavior and Energy Efficiency in Aluminum Machining: A Novel Approach Toward Sustainable Manufacturing [Volume 12, Issue 4, 2025, Pages 66-80]
  • Mohammadi, Abbas Designing of Conical Energy Absorber with Internal Pressure by Enhanced Vibrating Particle System Algorithm [Volume 12, Issue 2, 2025, Pages 29-41]
  • Mohammad Sadeghi, Bagher Accelerated Homogenization of a Cast Nickel-Based Superalloy VDM780 via Thermomechanical Processing [Volume 12, Issue 3, 2025, Pages 33-41]
  • Motallebi, Asadollah Effect of Constrained Groove Pressing on Anisotropy and Formability of Al-1050: Insights from Forming Limit Diagrams [Volume 12, Issue 2, 2025, Pages 58-67]

N

  • Najafzadegan, F. The Effect of Tungsten on Microstructure and Mechanical Properties of Sintered Tantalum by Hot Pressing in a Vacuum [Volume 12, Issue 1, 2025, Pages 10-17]
  • Narooei, Keivan Micromechanical Modeling of Two-Way Shape Memory Response of Semi-Crystalline Polymers Based on Equivalent Inclusion Method [Volume 12, Issue 3, 2025, Pages 42-55]
  • Nemati, R. Tribology Characteristics of Ultrasonic Impact Treated Co-Based L-605 Superalloy [Volume 12, Issue 1, 2025, Pages 37-50]

O

  • Omidi Hashjin, A. Statistical Modeling and Optimization of Variables Affecting Surface Hardness and Corrosion Resistance of 316L Stainless Steel in Ultrasonic Shot Peening Process Using Desirability Approach [Volume 12, Issue 1, 2025, Pages 28-36]

P

  • Pasoodeh, Behzad The effect of a New Hybrid Severe Plastic Deformation Method on the Microstructure and Mechanical Properties of CP-Ti [Volume 12, Issue 4, 2025, Pages 54-65]
  • Paydar, M.H. Study on the Effect of Fabrication Method on the Polarization of Solid Oxide Fuel Cells [Volume 12, Issue 1, 2025, Pages 4-9]
  • Paydar, Mohamad Hossein Densification Behavior of Fused Silica: Effects of Particle Size, Compaction Pressure, Sintering Temperature/Time, and Boron Oxide Addition [Volume 12, Issue 4, 2025, Pages 44-53]

Q

  • Qasemi, Mahdi Predicting Maximum Process Temperature in Cortical Bone Milling: An XGBoost Approach with Sensitivity Insights [Volume 12, Issue 3, 2025, Pages 4-19]

R

  • Rabiee, Amir Hossein Predicting Maximum Process Temperature in Cortical Bone Milling: An XGBoost Approach with Sensitivity Insights [Volume 12, Issue 3, 2025, Pages 4-19]
  • Rahnama, Saeed Designing of Conical Energy Absorber with Internal Pressure by Enhanced Vibrating Particle System Algorithm [Volume 12, Issue 2, 2025, Pages 29-41]
  • Razavi, Seyed Hossein Accelerated Homogenization of a Cast Nickel-Based Superalloy VDM780 via Thermomechanical Processing [Volume 12, Issue 3, 2025, Pages 33-41]
  • Reihanian, Mohsen Activation Energy and Zener-Hollomon Mapping of Hot-Deformed API X80 Steel Using Modified Hyperbolic Sine Constitutive Models [Volume 12, Issue 3, 2025, Pages 56-68]
  • Reihanian, Mohsen Hot Deformation Behavior of an API X70 Steel: A Processing Map Approach [Volume 12, Issue 4, 2025, Pages 20-33]

S

  • Safari, Mehdi Experimental Evaluation, Modeling and Statistical Analysis of Laser Forming Process of Curved Tubes [Volume 12, Issue 2, 2025, Pages 22-28]
  • Saghafi Yazdi, M. Tribology Characteristics of Ultrasonic Impact Treated Co-Based L-605 Superalloy [Volume 12, Issue 1, 2025, Pages 37-50]
  • Sedehi, Sayyed Mohammadreza Residual Stress Analysis in Milled DIN 1.2344 Die Casting Mold: A Fusion of Numerical Simulation and XRD Experimental Validation [Volume 12, Issue 2, 2025, Pages 42-57]
  • Sedehi, Sayyed Mohammadreza A Comprehensive Study on the Effect of Wire EDM Current Intensity on the Tribological Behavior and Energy Efficiency in Aluminum Machining: A Novel Approach Toward Sustainable Manufacturing [Volume 12, Issue 4, 2025, Pages 66-80]
  • Setoodeh, Alireza Mechanical and Thermal Characteristics of Clay-Incorporated Vinyl Ester Composite [Volume 12, Issue 2, 2025, Pages 15-21]
  • Seyyed Hatami, Seyyed Mohsen Ring Expansion with a Stepped Conical Punch to Extract the Workability Diagram in Bulk Metal Forming for C22000 Alloy: Experiments and Numerical Simulation with Ductile Damage Model [Volume 12, Issue 3, 2025, Pages 20-32]
  • Shahbaz, Mehrdad The effect of a New Hybrid Severe Plastic Deformation Method on the Microstructure and Mechanical Properties of CP-Ti [Volume 12, Issue 4, 2025, Pages 54-65]
  • Sharifi, Seyyed Nabi Al-din A Comprehensive Study on the Effect of Wire EDM Current Intensity on the Tribological Behavior and Energy Efficiency in Aluminum Machining: A Novel Approach Toward Sustainable Manufacturing [Volume 12, Issue 4, 2025, Pages 66-80]
  • Sheikh-Ansari, Mohammad Hadi Role of Constitutive Modeling on the Analysis of Shear Localization in Semi-Solid Deformation [Volume 12, Issue 2, 2025, Pages 4-14]
  • Sheikhi Azqandi, Mojtaba Designing of Conical Energy Absorber with Internal Pressure by Enhanced Vibrating Particle System Algorithm [Volume 12, Issue 2, 2025, Pages 29-41]
  • Shojaei Seyfabad, Ali Effect of Polymeric Additives on the Rheological Behavior of PZT Pastes for Extrusion Fiber Processing: Optimization by Taguchi Method [Volume 12, Issue 4, 2025, Pages 4-19]

T

  • Taghiabadi, R. Tribology Characteristics of Ultrasonic Impact Treated Co-Based L-605 Superalloy [Volume 12, Issue 1, 2025, Pages 37-50]
  • Tahmasbi, Vahid Predicting Maximum Process Temperature in Cortical Bone Milling: An XGBoost Approach with Sensitivity Insights [Volume 12, Issue 3, 2025, Pages 4-19]
  • Tamizifar, M. The Effect of Tungsten on Microstructure and Mechanical Properties of Sintered Tantalum by Hot Pressing in a Vacuum [Volume 12, Issue 1, 2025, Pages 10-17]

V

  • Vahdati, M. Statistical Modeling and Optimization of Variables Affecting Surface Hardness and Corrosion Resistance of 316L Stainless Steel in Ultrasonic Shot Peening Process Using Desirability Approach [Volume 12, Issue 1, 2025, Pages 28-36]

Y

  • Youzbashizadeh, H. The Effect of Tungsten on Microstructure and Mechanical Properties of Sintered Tantalum by Hot Pressing in a Vacuum [Volume 12, Issue 1, 2025, Pages 10-17]

Z

  • Zebarjad, Seyed Mojtaba Mechanical and Thermal Characteristics of Clay-Incorporated Vinyl Ester Composite [Volume 12, Issue 2, 2025, Pages 15-21]